Trailer Hitch Installation - 2016 Lincoln MKX - Draw-TIte Video

It sounds like you're talking about the video of the Draw-Tite trailer hitch receiver, part #75234, being installed on a 2016 Lincoln MKX. At the 5:23 mark the installer removes the fascia piece that I believe you're referring to.…

The hands free lift gate sensor on your 2017 Lincoln MKX will still work after installing the Curt Trailer Hitch Receiver #C78KR, but it will limit where your foot needs to be placed for the sensor to work. You will want to place your foot on…

For your 2017 Lincoln MKX the hitch part #75234 is a confirmed fit and will work well. Since hitch installs are pretty basic for qualified mechanics your best option is to find a local mechanic with a decent reputation and let them do it. I…

The only trailer hitch receivers we have for your 2017 Lincoln MKX hang down below the bumper like the Draw-Tite Max-Frame Trailer Hitch Receiver part #75234 and the Curt Trailer Hitch Receiver part #C78KR. While we do not offer a hitch that exits…

Yes there is some minor trimming of the bumper fascia/skirt on a 2022 Chevy Trailblazer (all models, including your RS) to install the Draw-Tite Max-Frame Trailer Hitch Receiver #DT55GR. This is needed so the receiver can protrude, but the portion…

With the install of a hitch on your 2022 Chevy Trailblazer RS like the Draw Tite part #DT55GR you will still be able to use the hands free liftgate feature of the vehicle but you would just have to kick to one side or the other.

Yes, for your 2021 Chevrolet Trailblazer we have the Draw-Tite Max-Frame Trailer Hitch Receiver #DT55GR. This is a class III trailer hitch that has a maximum towing capacity of 3,500-lbs, a maximum tongue weight capacity of 525-lbs, and has a sturdy,…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I attached a couple pictures that show the Draw Tite Hitch part #75234 installed on a Ford Edge Sport just like yours that has the different lower rear fascia. We did have one customer with a Sport model add that what helped them install the hitch…

I strongly recommend running the 12 volt power wire from the Curt Wiring Harness, #C59496, directly to the vehicle battery. The 12 volt accessory circuit was not designed to support the additional load of a trailer wiring harness. A wiring harness…

The best option would be to use the Roadmaster 12-volt Outlet Kit, #RM-9332. This kit is was designed to be used as a way to connect the 12-volt connection on supplemental braking systems used when flat towing a vehicle behind a motor coach. What I…