Recommended Class III Trailer Hitch For A 2021 Chevrolet Trailblazer

Question

Question:

Are there any class III hitches that work with a 2021 Chevrolet Trailblazer?

asked by: Randall

0

Expert Reply:

Yes, for your 2021 Chevrolet Trailblazer we have the Draw-Tite Max-Frame Trailer Hitch Receiver # DT55GR.

This is a class III trailer hitch that has a maximum towing capacity of 3,500-lbs, a maximum tongue weight capacity of 525-lbs, and has a sturdy, square tube design.

expert reply by: Bryce D

0

Answer 1

Yes there is some minor trimming of the bumper fascia/skirt on a 2022 Chevy Trailblazer (all models, including your RS) to install the Draw-Tite Max-Frame Trailer Hitch Receiver #DT55GR. This is needed so the receiver can protrude, but the portion…

view full answer...

Answer 2

It sounds like you're talking about the video of the Draw-Tite trailer hitch receiver, part #75234, being installed on a 2016 Lincoln MKX. At the 5:23 mark the installer removes the fascia piece that I believe you're referring to. This part…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Recommended Class III Trailer Hitch For A 2021 Chevrolet Trailblazer

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching