bing tracking image
Q & A Icon

Determining The Correct RV Camera System For A 2019 Keystone Outback 340BH Travel Trailer  

Question:

I have a 2019 Keystone Outback 340BH...please advise which system I should purchase that is compatible with my trailer. Thanks.

0

Expert Reply:

If your trailer isn't prewired for a specific brand then you can easily use any brand of your choice. Typically Keystone prewires their trailers for Furrion camera systems so you'll want to take a look a the mount on the back of your trailer. If it is the shark fin design like I have pictured below or has Furrion written on it then you know which system you're prewired for.

If you have the prewiring in place you can quickly and easily plug in the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision # FOS05TASF.

If you don't have prewiring then you can wire this system into the running light circuit. To do this you'll pop off the middle running light and splice into the wiring to power your camera any time you have the running lights on in your tow vehicle.

If you have Voyager listed on the prewiring camera mount then you can use the Voyager WiSight 2.0 Wireless Backup Camera System w/ Night Vision for Prewired RV # ASA37YR that you were looking at. If prewired it'll be just as simple by plugging in the camera into the port already provided. If not, then you'll do the same as stated above with the Furrion system and splice into the running light circuit.

Of the two systems I personally prefer Furrion, and the ability to add on side cameras later on, if wanted, make these the clear choice in my opinion. That being said if you have Voyager prewiring then definitely go with them for a quick and easy install.

expert reply by:
0
Kevin C
Furrion shark fin mount
Furrion shark fin mount
(click to enlarge)

Products Referenced in This Question


Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>