Is Load Rating of Taskmaster 4.80R12 Radial Trailer Tire For One Tire or Two

Question

Question:

Does this tire 990-lb max load for one tire only or two thank you

asked by: Al G

1

Helpful Expert Reply:

The 990 lb load rating is for a single Taskmaster 4.80R12 Radial Trailer Tire - Load Range C # TT48012C.

So two of the Taskmaster # TT48012C would have a capacity of 1,980 lbs.

expert reply by: Kyle S

1

Answer 1

The Detail K2 Mighty Multi A-Frame Utility Trailer #K2MMT5X7 comes with the hubs already assembled to the axle and should already have grease. The manufacturer does recommend checking the amount of grease and adding grease as needed prior to use…

view full answer...

Answer 2

That will really depend on the bearing grease used in the hubs of your Detail K2 Mighty Multi A-Frame Utility Trailer #K2MMT5X7. Typically manufacturer's of utility trailers use a standard grease like the #L11465 or #L11380 you saw mentioned,…

view full answer...

Answer 3

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 4

The only trailer component that determines the speed rating of the trailer is the tires. All you have to do is simply replace your current tires with one that is rated for highway use, like the Kenda Loadstar #AM3S120 that you referenced, and you…

view full answer...

Answer 5

You do indeed have a 12 inch rim. When you measure the diameter of the wheel, you'll need to measure the diameter of he wheel where the tire bead meets the wheel. I've provided you a cutaway diagram of a wheel showing where the measurement…

view full answer...

Answer 6

The smallest utility trailer we offer is the Detail K2 Mighty Multi Utility Trailer part #K2MMT4X6 which is 6' long x 4' wide. It's highway rated for speeds up to 65 mph which is going to be the limit for a lot of trailers this size due…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 9

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 10

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...