Parts Needed For Wiring Electric Brakes On a Tow-it-All Car Dolly
Question:
I have a used Tow-it-All car dolly. I am installing all new wiring. I discovered it has electric brakes that have been bypassed from a previous owner. I am looking for a 5 pin flat 25 wiring harness with a blue lead thats longer than 5. Do you carry a harness like this or do I need something else? Thank you
asked by: Brian
Expert Reply:
Since your Tow-it-All car dolly has electric brakes you will need to have a 6-pin or 7-way blade connector for your dolly. With electric brakes you are required to have a Bright Way Push-to-Test Trailer Breakaway Kit # 3802346 connected to a charge line. This will activate the trailer brakes in the event of a breakaway. Here is a list of all parts you will need.
Bargman 7-Way, RV-Style Connector # WG54006-043
etrailer Trailer Wiring Junction Box # 3430001-JBK
Bright Way Push-to-Test Trailer Breakaway Kit # 3802346
Bonded 4 Wire # 16-4B-1(sold per foot)
10 Gauge Primary Wire # 10-1-1(sold per foot)
Products Referenced in This Question
Junction Box and Installation Kit for Autowbrake Trailer-Mounted Electric Brake Controller
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- Junction Box
- etrailer
more information >
Bargman 7-Way, RV-Style Connector w/ 6' Long Coiled Cable - Trailer End
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 6 - 10 Feet Long
- Plug and Lead
- 7 Round - Blade
- Bargman
more information >
Product Page this Question was Asked From
Bright Way Push-to-Test Trailer Breakaway Kit with 1-Amp Charger and 5 Ah Battery - Side Load
- Trailer Breakaway Kit
- Kit with Charger
- Side Load
- Single-axle
- Tandem-axle
- LED Tester
- 1 Amp Charger
- Battery Included
- 5 Ah
- Bright Way
more information >
Continue Researching
- Shop: Brake Controller
- Q&A: Replacing 6-Way on Trailer With 7-Way Connector
- Q&A: Recommended Brake Controller And Wiring For 2000 Safari Trek With Tow Dolly
- Shop: Bright Way Push-to-Test Trailer Breakaway Kit with 1-Amp Charger and 5 Ah Battery - Side Load
- Shop: Universal Installation Kit for Trailer Brake Controller - 6-Way and 4-Way Flat - 10 Gauge Wires
- Shop: Wiring Kit for 2, 4, 6, and 8 Brake Electric Trailer Brake Controllers
- Article: Trailer Wiring Diagrams
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Search Results: 6 pin to 7 pin adapter
- Search Results: electric brake magnet
- Search Results: brake magnet
- Q&A: Dimensions of Bright Way Push-to-Test Trailer Breakaway Kit 3802307
- Q&A: How To Properly Mount The Side Load Bright Way Breakaway Battery And Box
- Q&A: Recommended Trailer Breakaway Kit with 1-Amp Charger and 5 Ah Battery
- Q&A: Can Bright Way Push-to-Test Trailer Breakaway Kit # 3802346 be Used on Outside of Trailer Frame
- Q&A: Availability of Weld-On Trailer Frame Mounting Plate for Bright Way Breakaway Kit
- Search Results: trailer drum brake kit
- Search Results: 10 inch trailer brakes
- Search Results: 7 inch brake drums
- Shop: Bright Way Push-to-Test Trailer Breakaway Kit with 1-Amp Charger and 5 Ah Battery - Top Load
- Shop: Replacement Magnet Kit for 10" Electric Trailer Brake Assemblies - 3,500 lbs
- Shop: Wire - Jacketed 6-Wire - per Foot
- Shop: Suspension Enhancement
- Video: Hopkins Trailer Breakaway Kit - Kit with Charger - 20099 Review
- Video: Hopkins 7-Way Blade Style Connector Review
- Video: Hopkins Engager Push-To-Test Trailer Breakaway Kit Review
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Choosing the Right Brake Controller
- Shop: Trailer Wiring
- Search Results: trailer brake controller