Will the Replacement Rail Pins and Clips for Curt 5th Wheel Trailer Hitches Work with B&W Patriot

Question

Question:

CAN THESE BE USED TO MOUNT A B@W PATRIOT 18K FIFTH WHEEL SLIDER HITCH PART# BWRVK3270 TO B@W ABOVE THE BED MOUNTING RAILS?

asked by: KEVIN Z

1

Helpful Expert Reply:

Yes, the Replacement Rail Pins and Clips for Curt 5th Wheel Trailer Hitches and Gooseneck Adapters part # C16902 will work with the B&W Patriot 5th Wheel Trailer Hitches. The pins are fairly universal so there will be no issues with fit.

expert reply by: Conner L

1

Answer 1

I have attached a few photos of the installation instructions for the B&W Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches part #BWRVK2503 which is a fit for your 2016 Chevrolet Silverado 1500 but unfortunately we have not yet…

view full answer...

Answer 2

It sounds like you might just be looking for a fifth wheel hitch for your 2018 GMC Sierra 1500 with 6-1/2' bed and if that's the case then we do have some great options but you will need a sliding hitch for cab clearance. The B&W Patriot…

view full answer...

Answer 3

We have some ways to gain more clearance in your truck bed but you'll need to either use a sliding hitch like the B&W Patriot #BWRVK3270 (you would just need the base #BWRVB3270) or you need to use a Sidewinder pin box which has a rotating…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 7

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

Answer 8

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

view full answer...

Answer 9

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 10

Yes you are - all 5th wheel hitches are going to require some type of rails in order to be used. So you'd need #DM8552016-71 for your 2006 Dodge Ram.

view full answer...

Answer 11

Hey Steve, so between the Curt #C16265 and the Pullrite #PUL36ZR I'd go wit the Curt but not the Q25. I'd go with the A25 #C24FR, which is basically the same thing as the Q25 but does not require the #C88KR adapter. Only the Curt is going to…

view full answer...

Answer 12

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Will the Replacement Rail Pins and Clips for Curt 5th Wheel Trailer Hitches Work with B&W Patriot

Product Page this Question was Asked From

Continue Researching