Review of CURT Fifth Wheel Installation Kit - Custom Brackets with Base Rails - C16418-104 Video

The distance on center that you want have between fifth wheel rails is right at 22 inches. Typically we recommend you place the rear edge where the installation instructions recommend and then use the fifth wheel hitch to place the front rail. But if…

I have attached a few photos of the installation instructions for the B&W Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches part #BWRVK2503 which is a fit for your 2016 Chevrolet Silverado 1500 but unfortunately we have not yet…

It sounds like you might just be looking for a fifth wheel hitch for your 2018 GMC Sierra 1500 with 6-1/2' bed and if that's the case then we do have some great options but you will need a sliding hitch for cab clearance. The B&W Patriot…

The Reese Universal Base Rails, part #RP58058 and the Curt Base Rails, part #C16204 are both universal fifth wheel base rails, although not identical. They will work with Curt, Draw-Tite, Hidden Hitch, Reese, Valley and Husky fifth wheel hitches. But…

Yes, the Replacement Rail Pins and Clips for Curt 5th Wheel Trailer Hitches and Gooseneck Adapters part #C16902 will work with the B&W Patriot 5th Wheel Trailer Hitches. The pins are fairly universal so there will be no issues with fit.

The part number you are looking for is the part #C16418-BK which is just the hardware of the bracket kit part #C16418 that you referenced.

A goose neck hitch ball, or the center of a 5th wheel hitch head for that matter, will be located either right over the rear axle or an inch or so forward of it. You do not want a goose neck hitch ball to be located behind the rear axle since this…

To best verify your installation of the Redarc Tow-Pro Elite Trailer Brake Controller, #RED44FR I suggest that you connect to your trailer and ops check if the brakes engage. You will not see an indicator light illuminated until connected. While…

It sounds like you could have a set of standard fifth wheel rails that most manufacturers use for their fifth wheel hitches to install into. The different manufacturers all make their own brand of rail kit, but they all have basically the same…

Yes, the Pullrite Superglide 2900 18K will fit the industry standard Curt fifth wheel rails part #C16418-104 without any adapters. The Pullrite Superglide 2900 is one of Pullrites Superglide hitches that fit the industry standard rails. The other…

As long as the Pullrite Superglide model you have is designed to fit industry standard fifth wheel rails (your model, the 2700 Superglide, is designed to fit them), the Mopar Hitch prep adapter part #RP30154 that you referenced would work just fine.

The Reese Quick-Install Custom Outboard Installation Kit part #RP56015-53 is what I recommend using to install a fifth wheel hitch on a 2021 Chevrolet Silverado 1500. I recommend this hitch as it uses outboard rails which are much easier to install…