Can I Use My X-Line Tonneau Cover with the TruXedo Elevate Rack # TX96NV?

Question

Question:

I have a 2018 Ford F150 with a 5 1/2 foot bed. I have a Line-X hard top, folding tonneau cover on my truck. I am curious if this rack will work with my Tonneau cover.

asked by: Blaine H

0

Expert Reply:

While we have the perfect ladder rack solution for you, I confirmed with TruXedo that the TruXedo Elevate # TX96NV does not fit with your Line-X hard folding tonneau cover on your 2018 Ford F-150 (5-1/2 ft. bed). This is because the Elevate is only designed to work with specific models of BAK, Extang, Retrax, and TruXedo tonneau covers.

With that being said, I recommend using the Adarac Pro Series Ladder Rack # A86RR (matte black) or # A4000964 (silver). With the Pro Series, the rack installs directly into your truck's open stake pockets without any additional clamps that obstruct your Line-X cover. Also, the uprights stand straight up in order to avoid any interference with the panels of your cover. This is important because most ladder racks have bases that angle inwards toward the truck and can rub/connect with the cover. The crossbars are fully adjustable anywhere along the rails for more cargo control. I went ahead and attached a video of the # A86RR installed on a 2014 Ford F-150 to provide you with perspective.

Additionally, you can add great options like the eye bolt tie-downs # A4000882 and the adjustable load stops # A4000880. For straps to secure your cargo, I suggest the Erickson # EM34409.

expert reply by: Bob C

0

Neighbor's Line-X Hard Folding Tonneau Cover
(click to enlarge)

Answer 1

Thank you for all of the info! I have a great ladder rack option that will both work with the TruXedo Pro X15 Soft Tonneau Cover #TX1497301 you have on your 2020 Nissan Titan 5-1/2' bed and clear the top of your cab. The TruXedo Elevate Truck Bed…

view full answer...

Answer 2

The Rhino-Rack Reconn-Deck Overland Truck Bed Rack #RR96VH will fit with the Deck Rail System on your 2019 Toyota Tundra, but the rails of your cover will make contact with these legs since they will sit flush with the bed sides of your truck. Since…

view full answer...

Answer 3

I have a solution for you. In order for the Xporter Pro Shift #TH54RR to work on your 2021 Toyota Tundra is if you pair the Pro Shift with the Base Rails for Thule TracRac SR Sliding Truck Bed Ladder Racks #TH24RV. This is how you will be able to…

view full answer...

Answer 4

Yes, the TruXedo Elevate Truck Bed Rack System #TX46NV is compatible with your UnderCover ArmorFlex tonneau cover. I reached out to TruXedo and they said the only UnderCover model that won't work with the ladder rack is the Flex.

view full answer...

Answer 5

This is a great question! I reached out to Truxedo/Truck Hero to confirm this, but there is a clamp that goes inside the bed rails that the T Slot Rails for Truck Hero Elevate Rack System #TH65FR will attach with. Unfortunately there is not an online…

view full answer...

Answer 6

As long as your Undercover Ultra Flex tonneau cover mounts inside of the bedrails you should be able to attach it to the rails of the TruXedo Elevate Truck Bed Rack System #TX96NV. That being said, the gaskets on the sides of the cover will most…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 9

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 12

The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…

view full answer...