Availability of Replacement Lock for Torklift FastGun Turnbuckles

Question

Question:

Is TLA 7509 compatible with Torklift Fastguns? I ‘ped’ a Torklift lock, and only need 1 for my Fastguns, and don’t need to buy a set of 4. I realize that I will be adding another key to my ever growing RV keys, if it is compatible. Thanks, Tony

asked by: T C

0

Expert Reply:

For a single replacement pin lock for the Torklift Fastguns we have the part # TL11001 which would be what you would need. The # TLA7509 doesn't have a wide enough usable span to work with the FastGuns # TLS9522-2-LK.

expert reply by: Jameson C

0

Answer 1

For a single replacement Pin Lock you will need part #TL11001. It is a direct replacement for your pin lock with the key P01. My contact at TorkLift verified that all of them are keyed alike so you will not have to give any specific part numbers when…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 4

The proper extension for your setup would be the one that allows you to have clearance of your hitch mounted accessory and also allows you to still be able to pull the steps down. If the receiver tube sticks out past the camper too far then you will…

view full answer...

Answer 5

I am sorry but we do not have an AC cover with those dimensions. The closest option we have is the Replacement RV Air Conditioner Cover for Penguin and Dometic Air Conditioners item #AT3308046006 which measures 40-1/2" long x 29" wide x…

view full answer...

Answer 6

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 7

Hi there David; we do have truck camper jacks that can work for your F-250 with a lift and large tires. What you can use are camper jacks from Brophy, which have a 17" to 67" lift range, which is the highest possible lift height. There are…

view full answer...

Answer 8

Increasing the tire and wheel size can increase the height of the trailer but it's usually quite minimal. Before you do anything else you should see if the pin box can be adjusted. Although you have to be careful here since This will lower the…

view full answer...