Can 2-5/16 Hitch Ball be Used on 6k Equal-i-zer Weight Distribution Hitch EQ37061ET
Question:
Can you put a 2 5/16 inch ball on this or only the 2 inch it comes with? What size are the bolt holes? Thanks
asked by: Jim
Expert Reply:
Let's start with the hole size, which are the industry standard 3/4" for the Equal-i-zer Weight Distribution Shank - 12" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW # EQ90-02-4100.
As for the hitch, yes, you can use a 2-5/16" hitch ball with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 6,000 lbs GTW, 600 lbs TW # EQ37061ET.
What you will need for that is the 2-5/16" Hitch Ball for Equal-i-zer Weight Distribution Systems # EQ91-00-6100.
To make installing the hitch ball much easier, I highly recommend Thin Walled Socket # ALL643216.
Products Referenced in This Question
1-7/8" 12pt Thin Walled Socket - 3/4" Drive - Chromium-Vanadium Steel
- Hand Tools
- Ratchets and Sockets
- Sockets
- SAE
- 3/4 Inch Drive
- 1-7/8 Inch
- Alloy Steel
- Powerbuilt
more information >
Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 6,000 lbs GTW, 600 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Shank Not Included
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 400 lbs
- 500 lbs
- Equal-i-zer
more information >
2-5/16" Hitch Ball for Equal-i-zer Weight Distribution Systems - 10,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- Equal-i-zer
more information >
Product Page this Question was Asked From
Equal-i-zer Weight Dist Shank - 12" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1400 lbs TW
- Fits 2 Inch Hitch
- Equal-i-zer
- Square - 3 Inch Drop
- Square - 7 Inch Rise
- Equal-i-zer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Replacement Trunnion Spring Bars for Fastway e2 Weight Distribution Systems -Qty 2 - 1,000 lbs TW
- Shop: Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 6,000 lbs GTW, 600 lbs TW
- Search Results: eq70~00~4800
- Q&A: What Size Socket is Needed For 2-5/16 Inch Hitch Ball
- Shop: 1-7/8" 12pt Thin Walled Socket - 3/4" Drive - Chromium-Vanadium Steel
- Shop: Thin Walled Socket for Equal-i-zer Hitches
- Video: Fastway e2 Weight Distribution System Review
- Shop: Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 8,000 lbs GTW, 800 lbs TW
- Shop: 2-5/16" Hitch Ball for Equal-i-zer Weight Distribution Systems - 10,000 lbs
- Shop: Replacement Trunnion Spring Bars for Fastway e2 Weight Distribution Systems - Qty 2 - 1,200 lbs TW
- Q&A: What Size Holes Are Used on the Curt Weight Distribution Shank
- Article: 5 Things to Know About Weight Distribution Hitches
- Video: B&W Continuum Weight Distribution System Review
- Shop: Trailer Hitch
- Search Results: weight distribution hitch
- Q&A: Are Replacement Spring Bars Available For The Curt TruTrack 4P Weight Distribution System # C74RV
- Search Results: 44649
- Shop: Trailer Wiring
- Video: Review of Reese Weight Distribution Hitch - 6K WD With Sway Control - RE34FR
- Q&A: Best Way to Prevent Sagging Suspension When Towing a Trailer
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Search Results: dust cap
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Shop: Brake Controller
- Video: Choosing the Right Brake Controller
- Search Results: 68149
- Q&A: Recommended Weight Distribution System for R-Pod Trailer
- Article: Determining Trailer Tongue Weight
- Shop: Suspension Enhancement