How To Install The Replacement 12V DC Motor For Ventline, Ventadome, And Vanair Fans  

I have attached the Replacement 12-Volt DC Fan Motor, #BVD0218-00, installation instructions for you. To replace the vent motors on your 1986 Airstream 345 you will need to use the drill template which is shown in the attached picture. Just mount…

I believe what you're looking for, for your 2016 Coachman Class C Leprechaun BHF320 is the: -Replacement Screen Frame with Screen, Rocker Switch, and Wire for Ventline Roof Vents - Polar White #BVC0573-41R. This replacement screen and frame…

Motor #BVD0218-00 should be the correct replacement. The motor comes with new wires, a bracket, and hardware. The screws that hold the motor to its bracket can be accessed by removing the fan blade. It should just pull off of the motor shaft. You…

You can easily replace the thermostatically controlled RV ceiling fan you have in your 1999 Holiday Rambler Endeavor 37WDS with one that does not have that feature. We have the Ventline Ventadome Trailer Roof Vent part #V2094SP-28 which fits the…

The Replacement 12V DC Motor for Ventline, Ventadome, and Vanair Fans #BVD0218-00 does not have a specific direction of shaft rotation. The wiring will dictate the direction of the motor. The Replacement Fan Blade for Ventline Ventadome Trailer…

The Replacement Push-Button Switch for Ventline Trailer Roof Vents #BV0199-03 will have one wire as an input and one as an output. The switch simply mounts through a hole with the threaded nut on the outside where the switch and threaded housing…

The threaded portion of the #BV0199-03 Replacement Push Button Switch is .368 of an inch, as shown in the provided photo. It sounds as if this switch would work fine for your needs.

The correct replacement motor for a Ventline Vent Fan V2094 is the Replacement 12V DC Motor for Ventline, Ventadome part #BVD0218-00.

The MaxxAir FanMate vent cover Item #MA00-955001 is going to be just a little taller but the louvred end tapers in and it does not come with the screen which is Item #MA00-955202. 25" long x 18-1/8" wide x 10-1/4" tall. The MaxxAir II…

We do not have a list of parts used on your Dutchmen Aerolite trailer so to determine the correct replacement parts for your trailer it will require some measuring and examination of existing parts. The fan motor is likely going to be #BVD0218-00…

We have the MaxxAir Standard RV and Trailer Roof Vent Cover, #MA00-933066 in white. This has overall dimensions of 19" long x 18-1/2" wide x 9-1/2" tall.

All of the fans and fan motors that we offer are replacement items for roof vents that came with fans. If the roof vent in your trailer did not come with a fan, then you may be able to add a fan, but you will likely have to fabricate a mount for the…