Seaflo Thru-Hull Fitting for Livewells and Bilge Pumps - 1-1/8" Inner Diameter

Video Transcript for Review of Seaflo 1-1/8 Boat Drain Socket - SE28FR

Michael: Hi there I'm Michael with etrailer.com. Today, we're going to take a quick look at the Seaflo Through Haul Drain Fitting. This is going to attach right through the transom on your boat. It's going to provide an outlet for your LiveWell overflow or an exhaust port for your bilge pump. This is a nice plastic construction. So it's going to hold up well against chemicals and saltwater exposure, those sort of things.

You can see it as a nice white color, and it does have a nice finish on the outside. So it's going to blend in well with your boat. The nut here is going to tighten down onto our transom to give us a nice, secure fitting so we don't have to worry about that wobbling or anything like that. And the backside here is where we're going to hook our hose up to so that water can flow out to the exterior of our boat.Now, as far as our dimensions go, this is right about two and a half inches in outer diameter. Our inner diameter is just ...

or just over an inch, call it an inch and 1/8, we get that lined up there, maybe right at an inch, pretty close to it. And then on the backside here where our hose is going to connect to is right about an inch. See about an inch and 1/8 there. As far as our length goes, we're looking at just shy of three and 3/4 of an inch. We'll call it 3 and 11/16.

But overall, I think this is going to be a great option for you. Easy way to get a plug connected so that your water can drain out of your boat. Make sure that you're not getting weighed down with too much water, or if it rains or any waves come over the edges, you'll be able to drain that water out very easily. So that's going to complete our look for today. Again, I'm Michael with etrailer.com.

Thanks for watching.