Can Yakima Control Towers Fit Rhino Rack RTC Roof Tracks

Question

Question:

Will these fit RHINO Rack RTC roof tracks? Yakima control towers

asked by: Gary N

0

Expert Reply:

If the Yakima Control Towers were the ones designed for factory installed tracks part # Y8890027 then yes they can fit the RTC tracks # RTC14 with the # Y00221 as the landing pad set.

expert reply by: Jameson C

0

Answer 1

I do have a solution for you, however awnings like the Rhino-Rack Batwing #RR33100 cannot mount directly to the RTC-Style Roof Rack Tracks #RRRTC8JWMY11. The issue is the awning will require a certain amount of vehicle overhang from its attachment…

view full answer...

Answer 2

To use the Yakima Skyline Towers #Y53TR on your 2021 Toyota Highlander the correct landing pads are the Landing Pad 28 for Skyline and Control Towers #Y66VR.

view full answer...

Answer 3

You will need the SkyLine Towers for Yakima Crossbars, #Y53TR for a set of 4 or, #8880614 for 1 each.

view full answer...

Answer 4

We do have the Replacement Mounting Kit #TH04958 for your Thule Sidekick Roof Mounted Cargo Carrier #TH78GC. The Rhino Rack Heavy-Duty Crossbar Fit Kit #RUBK-MF brackets are only designed for the Rhino-Rack Master-Fit cargo boxes RMF400, RMF440,…

view full answer...

Answer 5

The Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars - Track Mount - Black - 54" Long #Y02-480B can in theory be used on your 2010 Jeep JKU Wrangler hard top but it is not a confirmed fit. The tracks can be cut to your desired length.…

view full answer...

Answer 6

Yes, the Replacement Anchor Plate "A" for Yakima LandingPad 1 (QTY 8), part #Y8810074, will work with the Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 55" Long - Qty 2, part #RTC14. I have included a product description link…

view full answer...

Answer 7

Yes, the Yakima Landing Pad 1 part #Y00221 does fit the Rhino Rack roof track part #RTC14 that you also referenced.

view full answer...

Answer 8

The 63 inch Rhino Rack RTC Style Roof Rack Tracks, #RTC16, come with 8 T-bolts for each track, 16 total, and each T-bolt measures 1 inch long. Although manufacturers typically do not recommend using another company's towers on their track, I went…

view full answer...

Answer 9

Yes, I test fit the Rhino-Rack RTC-Style Roof Rack Tracks #RTC12JW with the Landing Pad 1 #Y00221 and the Landing Pad 4 #Y00224 and found that they are compatible with each other. All of these parts come in a quantity of 2. To complete your setup you…

view full answer...

Answer 10

The Rhino-Rack RTC-Style Roof Rack Tracks will work with the Camper shell to give you the compatible tracks. There are different lengths available and you can cut them down if needed: Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/4" Long…

view full answer...

Answer 11

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Can Yakima Control Towers Fit Rhino Rack RTC Roof Tracks

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching