Center Cap Options For 15 Inch Aluminum Liger Trailer Wheel

Question

Question:

I purchased the Aluminum Liger Trailer Wheel - 15 x 6 Rim - 6 on 5-1/2 - Black and wanted to see what are my center cap options?

asked by: Elvi

0

Expert Reply:

Thanks for the purchase, and you have a pair of options that will fit the Aluminum Liger Trailer Wheel - 15" x 6" Rim - 6 on 5-1/2 - Black # LH49FR:

- Lionshead Trailer Wheel Center Cap w/ Snap-In Plug - 4.25" Pilot - Stainless Steel # LHCS108-SI60C

- Replacement Center Cap for 15" or 16" Aluminum Viking Series Wheels - Gloss Black # CXF104B

Both of these will fit the wheel, and it really just comes down to what style you prefer to go with your wheel.

expert reply by: Kyle S

0

Answer 1

The center cap you'll want to use with the Aluminum Liger Trailer Wheel #LH49FR is the Lionshead Trailer Wheel Center Cap #LHCS108-SI60C. This is a stainless steel cap with a snap-in plug to make it easier for you to add grease to an EZ-Lube…

view full answer...

Answer 2

The overall diameter with a 235/85-16 will be 3.2 inches taller than a 225/75-15. Since the additional diameter is split on either side of the hub that means you would have 1.6 inches less fender clearance. The width difference would be one…

view full answer...

Answer 3

For your 79" slide out I recommend the Solera RV Slide-Out Awning - 6'7" Wide - 48" Projection - Black Item #LCV000168105. For the 153" slide out I recommend the Solera RV Slide-Out Awning - 13'1" Wide - 48"…

view full answer...

Answer 4

I'd be happy to help! For your 2017 Montana 5th Wheel you'll need the following slide-topper awnings: 87-3/4" Slide out: #LCV000163288 for white or #LCV000168106 for black 130-3/4" Slide out: #LCV000163295 for white or #LCV000184673…

view full answer...

Answer 5

When measuring the slide out you'll want to measure from outside edge to outside edge of the flanges to get the correct measurement. A lot of times slide outs are close to awnings or doors so you have to account for the overhang of the arms when…

view full answer...

Answer 6

We can get you set up! For your 86" slide use the Solera RV Slide-Out Awning -part #LCV000165062 which is 7' 1". For your 156.25" us part #LCV000168109 which is 13' 1". Finally for your 144.5" slide use part…

view full answer...

Answer 7

I went out to the warehouse to measure the CargoBuckle G3 #IMF18804 that you referenced and found that at the longest and widest points the base measured 9-7/8" x 6-9/16". The base measures about 4-1/2" deep so you will want to make…

view full answer...

Answer 8

That appears to be the Aluminum Eagle wheel from Lionshead. We currently only carry this wheel in an 8 lug 16" x 7". Our most similar wheel in a 15x6 is the Aluminum Liger Trailer Wheel #LH49FR. This is similar in design and color to your…

view full answer...

Answer 9

Both the MORryde Rubber Equalizers #MR87ZR and Dexter E-Z Flex Suspension Kit #K71-652-00 are achieving the same result. They are doing so with slightly different designs but end up with the same result. I recommend using the Dexter E-Z Flex…

view full answer...

Answer 10

I've reached out to the manufacturer about your specific question. He informed me that the Aluminum Viking Series Valhalla Trailer Wheel #AX02660655BMMFL valve stem is made of metal.

view full answer...

Answer 11

It does; the valve stem is indeed included with the Karrier ST205/75R15 Radial Trailer Tire with 15" Aluminum Wheel - 5 on 4-1/2 - Load Range C #KE27JR.

view full answer...

Answer 12

I reached out to my contact at Dexter Axle who said that your axle is rated for 3,500 lbs and it uses inner bearing #L68149, outer bearing #L44649, and the grease seal #58846. All of these can be found in the kit #BK2-100 if you are needing to…

view full answer...