Replacement Roof Flange Assembly For MaxxAir Maxxfan Deluxe RV Roof Vent

Question

Question:

We need the metal clips that come on the Replacement Roof Flange Assembly for MaxxAir Maxxfan Deluxe RV Roof Vent. Do you sell these separately?

asked by: Sam M

0

Expert Reply:

When it comes to replacing the roof flange assembly on your trailer we sell The Replacement Roof Flange Assembly for MaxxAir Maxxfan Deluxe RV Roof Vent - White # MA49FR. We do not sell the metal clips individually. You would have to buy the whole assembly.

expert reply by: Noah E

0

Answer 1

According to Airexcel, the manufacturer of MaxxFan, their #MA49FR replacement roof flange assembly is compatible with their #MA00-07500K 7500K MaxxFan deluxe fan. I've provided a drawing showing the dimensions of the flange as well as a link…

view full answer...

Answer 2

Yes. The Replacement Roof Flange Assembly #MA49FR is a confirmed fit on the MaxxFan Deluxe Fan Model 00-07000K.

view full answer...

Answer 3

The LVT1820 and the Longview Custom Towing Mirrors - Slip On - Driver and Passenger Side Item #LO54FR are the same product. The manufacturer may have changed the item number on their end over time or has multiple item numbers and this was the one…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 12

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

Replacement Roof Flange Assembly For MaxxAir Maxxfan Deluxe RV Roof Vent

Product Page this Question was Asked From

Continue Researching