Replacement Key for etrailer Coupler Lock

Question

Question:

we have a lock similiar to this one: etrailer Trailer Coupler Lock for Flat Lip 1-7/8 and 2 Ball Couplers - Aluminum - Silver Item # e98893 how would we go about getting an extra key for it. Local hardware store couldnt cut one for us.

asked by: Rebeka W

0

Expert Reply:

Assuming the lock you have that is similar to the # e98893 is an etrailer lock, we do have replacement keys available. Since you have a key already you can look at the key for the 3 digit number engraved on the key. Once you have this number you will be able to choose the correct replacement key for a spare.

For example, if you have 014 on your key then the # e88UR would be the correct spare. If you have a different lock brand feel free to reach out and let me know what you have along with the key number. If there is no printed key number on your key then you may be able to find it on the face of the lock core.

I have attached a link with all of our etrailer replacement keys for your reference.

expert reply by: Robin H

0

Answer 1

There will be a number on both the lock core and keys for etrailer.com coupler locks. This number is usually a zero followed by two other numbers. The three digit numeric value will correspond to the correct cut needed to operate the lock. If you…

view full answer...

Answer 2

We used to carry replacement keys for those locks but Draw-Tite discontinued those keys and so the only option we have is for you to replace the entire lock with something like part #e98893 or #e98894.

view full answer...

Answer 3

I have a solution for you but the etrailer Hitch and Coupler Lock Set - 2" Hitch - 2-5/16" Ball item #e68ZR slides onto a standard coupler and most likely won't work on yours if it has a wider coupler and a larger rolled lip than in the…

view full answer...

Answer 4

I have an excellent option for you which includes a hitch pin lock for the trailer hitch (1-1/4" and 2"), a pin lock for the coupler, and a wraparound lock for the coupler (1-7/8", 2", and 2-5/16"). This lock set will all use…

view full answer...

Answer 5

For a keyed alike lock set that fits a 2" receiver, a hitch pin, and a coupler lock. You will want the etrailer Hitch and Coupler Lock Set - 2" Hitch - 2-5/16" Ball item #e68ZR. This set uses the same key to unlock all three locks. I…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Replacement Key for etrailer Coupler Lock

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching