Availability of Replacement Key for Draw-Tite Trailer Coupler Lock

Question

Question:

I am in need of a DT Security trailer hitch lock replacement key. My current key broke. It shows the number 5527 on it so I am assuming I need a DTKEYR5527. I don’t see that listed on your site for sale. Please advise. Regards,

asked by: Pat

0

Expert Reply:

We used to carry replacement keys for those locks but Draw-Tite discontinued those keys and so the only option we have is for you to replace the entire lock with something like part # e98893 or # e98894.

expert reply by: Jon G

0

click to enlarge

Answer 1

In order to obtain extra keys for the Fastway Trailer Hitch Receiver Lock part #FA86-00-3160 you would need to first order the lock separately. Then once you obtain the lock you can look to see what key code you have. Once you know this you can then…

view full answer...

Answer 2

You can purchase Re-Keying Kit, #DTLBM02RK, to re-key your ball mount. The kit includes a tool to remove the locking cylinder you have in the ball mount now. Once you receive the kit, you will need to put some air tool oil in the hole that the lock…

view full answer...

Answer 3

Assuming the lock you have that is similar to the #e98893 is an etrailer lock, we do have replacement keys available. Since you have a key already you can look at the key for the 3 digit number engraved on the key. Once you have this number you will…

view full answer...

Answer 4

The Blaylock EZ Lock Trailer Coupler Lock #BLTL-33 is designed to work perfectly with a standard padlock, but I think the typical opening size on the back of a puck lock will be a bit too small to fit over the end of its pin/shank. The pin/shank on…

view full answer...

Answer 5

Some couplers have no lip, some have one that's a little rolled, and others have a flat lip, which is where the AMPLock Trailer Coupler Lock for Flat Lip 2-5/16" Ball Couplers #AMP74FR comes into play. I'm attaching a photo one of our…

view full answer...

Answer 6

Based on what your VMC900L has wrong with it the best option would be to replace the lead leg with part #LC119102.

view full answer...

Answer 7

Since your Venture leg is the follow leg the repair kit is #LC146060. If you had the lead leg it would be #LC146059.

view full answer...

Answer 8

Weight distribution systems that have 2-point sway control generally have sway control just at the ends of the springs bars on the trailer side. On the Fastway systems for example the L bracket that secures the bar to the frame bracket can be…

view full answer...

Answer 9

You can use the RV Propane Gas Detector #RS64FR to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 10

There are a couple of different ways you can lock the Curt QuickPin No-Latch Trailer Coupler for 2" Ball, either with a standard coupler lock, or you can use a 1/2 inch diameter hitch pin lock, since that is the same size as the pin and clip…

view full answer...

Answer 11

The etrailer Trailer Coupler Lock - Flat Lip 1-7/8" and 2" Ball Couplers - Aluminum - Yellow #e98897 and the etrailer Trailer Coupler Lock for Flat Lip 1-7/8" and 2" Ball Couplers - Aluminum - Silver #e98893 is the exact same…

view full answer...