D-Ring Size For Bulldog Winch Ratcheting Wheel Tie-Down Strap

Question

Question:

What size D Ring is recommended to accommodate the stamped steel hooks and clasp that this strap uses?

asked by: Michael P

0

Expert Reply:

I recommend using 1/4" or 1/2" D-rings with the Bulldog Winch Ratcheting Wheel Tie-Down Strap for Oversize Spare Tire - Horizontal Mount - 2,000 lbs # BDW20363.

You can use the Brophy Swiveling D-Ring Anchor w Backing Plate and Hardware - Bolt-On - Recessed Mount - 2,000 lbs # RR6K or Brophy D-Ring Tie Down Anchor - Bolt On - 1/2" Diameter - 2,000 lbs # DR01 with Backing Plate # BP1D.

expert reply by: Kyle S

0

Answer 1

The inner measurement of the Brophy D-Ring Tie Down Anchor item #DR01 is 2 1/4". I have attached a diagram with the measurement.

view full answer...

Answer 2

The mounting holes on the Buyers Products 5/8" Forged D-Ring With 4-Hole Integral Mounting Bracket #337B40MP you were looking at are 5" apart on center as shown in the included diagram. I included a video of Adam installing the #337B40MP on…

view full answer...

Answer 3

The Brophy D-Ring Tie Down Anchor #DR01 features a 5/8 x 3 inch coarse thread bolt. It is designed for use with the Backing Plate #BP1D so it is not available with a different bolt thread. I have attached a couple short video reviews on this product…

view full answer...

Answer 4

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...

Answer 5

Hi Larry, So we have a couple bumpers that may work, though each is 96 inches long. They can be cut to length though, and the difference is their width, as one is 3" wide and the other 4" wide to fit different size bumpers: - Pre-Drilled…

view full answer...

Answer 6

Thank you for the images Barb, but you are going to have to take a couple measurements to verify what is going to work best for your exact situation. It looks like you have a 2019 Toyota Tundra with the B&W Turnoverball Underbed Gooseneck Trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...