Length of Blue Ox Off-Road Bumper Adapters for Blue Ox Motorhome Mounted Tow Bars

Question

Question:

do you have any longer like 9 inches this one work, but I sure could use a longer one if possible

asked by: Donald L

0

Expert Reply:

For a Blue Ox tow bar, we have the one length of 6-1/8" for either the 1" D-Rings, # BX88358 or the 7/8" D-Rings, # BX88357.

expert reply by: Michael R

0

Answer 1

For the D-Ring mounts on the bumper on your 2013 Jeep Wrangler you will need adapter #BX88296. It uses a 7/8 inch pin and fits around tabs that are 1 inch thick.

view full answer...

Answer 2

Roadmaster makes a base plate kit that is designed specifically for the Rugged Ridge bumper like you have which is part #1437-3 which you could attach a Roadmaster tow bar like the Falcon 2 #RM-520 directly to.

view full answer...

Answer 3

I do have a couple of options for you, however I checked with my contact at Blue Ox and unfortunately there isn't a way to use the Adapter Lugs #BX88357 for your 2001 Jeep TJ Off-Road Bumper with a ReadyBrute Tow Bar. If you already have…

view full answer...

Answer 4

I went ahead and contacted my tech at Roadmaster, and he confirmed that while he doesn't have the exact measurement below the bumper where the Base Plate #RM-521424-5 installs on a 2004 Jeep TJ, he did confirm that the pins on the baseplate…

view full answer...

Answer 5

The Blue Ox Alpha 2 Non-Binding Tow Bar - Motorhome Mount #BX7380 will work with your 2003 Jeep TJ if you have The Blue Ox Base Plate Kit #BX1120 already installed on your 2003 Jeep TJ. The tow bar has a heavy-duty steel construction and is powder…

view full answer...

Answer 6

That's a good question, and when it comes to flat towing vehicles, our recommendations often come down to things like fit and how the part installs. Blue Ox is a really good option and make high-quality products, but so does Roadmaster and…

view full answer...

Answer 7

So the Demco base plates are not able to use a Blue Ox Attain tow bar, nor work with the bumper on your 2004 Jeep TJ. I know you mentioned rather not using the adapters, but that really is the only way I know of to use your tow bar on your Jeep…

view full answer...

Answer 8

Okay, so let's start with the simple answer about compatibility - yes, you can use the Roadmaster Falcon 2 Tow Bar #RM-520 with your 2000 Jeep Wrangler so long as your Wrangler has the appropriate base plates. For this I recommend the…

view full answer...

Answer 9

You are on the right start for flat towing components for your 2000 Jeep Wrangler with the Direct Connect base plate kit #RM-521424-5 and the Nighthawk Tow Bar #RM-676. These are our two easiest to use and best options for your Wrangler. For…

view full answer...

Answer 10

If your Jeep has an aftermarket bumper installed with 15/16" holes (0.9375). The Blue Ox Aftermarket Off-Road Bumper Adapter - 7/8" Pin, #BX88357, is identified with a nominal hole diameter of 7/8". It specifically states…

view full answer...

Answer 11

You are correct that the Blue Ox #BX1120 is confirmed for your 2003 Jeep Wrangler X model, as long as it has the double tube bumper. The Blue Ox #BX1126 is confirmed for 2007 - 2014 Jeep Wrangler, and Wrangler Unlimited without aftermarket bumpers,…

view full answer...

Answer 12

In order to use a tow bar with a set of welded-on d-rings which are commonly found on aftermarket Jeep bumpers you need a specific type of tow bar, one that mounts on the motorhome when not in use. The Roadmaster Falcon 2 Tow Bar part #RM-520 and…

view full answer...