Roadmaster Direct-Connect Base Plate Kit Installation - 2014 Jeep Wrangler Video

Yes, a taillight converter will combine your MH's separate stop/turn signals into the combined format used in standard 7-way wiring. Roadmaster part #RM-732 will take in these separate 3-wire RV signals and output them combined on 2 wires.…

For a Blue Ox tow bar, we have the one length of 6-1/8" for either the 1" D-Rings, #BX88358 or the 7/8" D-Rings, #BX88357.

The diode part #RM-790 that you referenced does exactly what you are looking to do. It takes two power sources and can combine them onto one wire and prevents backfeeding from either circuit. So for what you need this would work well.

To flat tow your Jeep Wrangler JK behind your motorhome, you will need a base plate kit, tow bar, safety cables, tail light wiring harness, and a supplemental braking system. Depending on the year of your Wrangler, you may also need a Brake-Lite…

I'm glad no one was hurt in the loss of your Liberty's brave fit against the cement truck, but don't worry, I can help you equip your Wrangler with the proper products to get it flat tow ready. First, I would recommend the Hopkins wiring…

To connect a Blue Ox base plate to a Blackhawk 2 All Terrain tow bar like item #RM-422 you will need the Roadmaster Tow Bar to Blue Ox Brackets Adapter item #RM-031.

Per the manufacturer when installing the Roadmaster 9700 braking system the black and white wires are for the breakaway connection. The green wire will then take the brake signal wires from the lighting kit and will use it as an activation for the…

You could try just trimming a section of the air dam out for the bracket to go through, but most likely you would find that it's lack of support would cause it to be rather flimsy and it would make tightening the bolts on the outside of the base…

I assume you are talking about the Falcon 2, #RM-520, and the Falcon All-Terrain, #RM-522, since the original Falcon tow bar has been discontinued for a while. If you find yourself in situations where you can't bet lined up straight with the toad…

Roadmaster Recommends that you use a dry silicone lubricant on the retractable arms of the RoadMaster Falcon 2 Tow Bar #RM-520. The reason for this is because a dry lubricant will not attract dirt like a wet one.

If a tow bar isn't sitting with the accepted level range you will have a few issues. You will wear out the front suspension of the towed vehicle and you will wear out the front tires of the vehicle being towed. Also, tow bars eventually will wear…

The Compete Repair Kit for Roadmaster Falcon Towbar 5250 #RM-910003-55 that you referenced is confirmed to fit your Falcon 5250 tow bar so the included bushing would be the correct size for you tow bar.