Replacement Tires And Wheels For A 1986 Skamper Pop-up Camper  

Yes, 13 inch galvanized steel wheels do have weight limits. For example, the Dexstar Steel Spoke Trailer Wheel, part #AM20234, that you referenced has a weight limit of 1660 lbs at 65 psi. Other rims will have other weight limits based on their…

There are a number of options for trailer wheels with a 5 on 4-1/2" bolt pattern that will allow you to mount a 185/80-13 tire like the Kenda #AM10208, it really just depends on the style you want. I'll go ahead and list out…

The weight of the Dexstar Steel Directional Trailer Wheel - 13" x 4-1/2" Rim - 5 on 4-1/2 - Silver #AM20259 is 13 lbs.

The Americana trailer wheels part #AM20234 are hot dip galvanized. Offset is zero.

Here is a list of the wheels we have which will fit the Kenda Karrier ST185/80R13 Radial Trailer Tire #AM10208 with a 5 on 4-1/2" bolt pattern. Please let me know if your hub uses a different bolt pattern. Aluminum Hi-Spec Series S5…

Thank you for the specs, and I can say definitively we do have the exact wheels and tires you need. Your concerns are definitely understandable, but when it comes to trailer tires, what matters is the combined capacity of the tires. So as long as…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13…

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are…

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this…