Are Americana Trailer Wheel AM20234 Hot Dip Galvanized Finish

Question

Question:

Are these Hot Dip Galvanized? or cheaper cold galvanized? What is the offset?

asked by: LeRoy H

0

Expert Reply:

The Americana trailer wheels part # AM20234 are hot dip galvanized. Offset is zero.

expert reply by: Jameson C

0

Answer 1

The weight of the Dexstar Steel Directional Trailer Wheel - 13" x 4-1/2" Rim - 5 on 4-1/2 - Silver #AM20259 is 13 lbs.

view full answer...

Answer 2

Yes, 13 inch galvanized steel wheels do have weight limits. For example, the Dexstar Steel Spoke Trailer Wheel, part #AM20234, that you referenced has a weight limit of 1660 lbs at 65 psi. Other rims will have other weight limits based on their…

view full answer...

Answer 3

Here is a list of the wheels we have which will fit the Kenda Karrier ST185/80R13 Radial Trailer Tire #AM10208 with a 5 on 4-1/2" bolt pattern. Please let me know if your hub uses a different bolt pattern. Aluminum Hi-Spec Series S5 Trailer…

view full answer...

Answer 4

There are a number of options for trailer wheels with a 5 on 4-1/2" bolt pattern that will allow you to mount a 185/80-13 tire like the Kenda #AM10208, it really just depends on the style you want. I'll go ahead and list out the options for…

view full answer...

Answer 5

I can definitely help you find replacement tires with rims and without rims, but I need some more information. I see you have a 1986 Skamper pop-up camper. I still need to know what bolt pattern your wheels have and the size of the tires you have on…

view full answer...

Answer 6

For trailer tire and wheel combo #AM30660 you should torque each of the 1/2 inch lug nuts to 75-85 foot pounds. Whether it is a powdercoated steel wheel like on #AM30660 or a galvanized wheel of the same size, the torque specs would be the same.…

view full answer...

Answer 7

The galvanized wheels from Americana are always hot-dipped. Some of the Taskmaster wheels use a PVD (Physical Vapor Deposition) coating that is a black finish and those wheels are not hot-dipped. We do specify the wheels that use the PVD and they are…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

It is not a requirement to balance trailer tires like you do for your vehicle tires. The reason for this is because the trailer tires have a tendency to "throw weights". This means that the weights come off the wheels. This can happen for a…

view full answer...

Answer 10

If you want the most durable trailer wheel that won't corrode, I would recommend going with an aluminum wheel. These can be attractive as well as durable. A 13 inch 5 on 4-1/2 bolt pattern aluminum wheel, that I think is attractive is the…

view full answer...

Answer 11

All the Americana or Dexstar galvanized trailer wheels we offer are indeed hot dipped.

view full answer...

Answer 12

On a 12 inch wheel that uses 1/2 inch lug nuts you will need to torque the lug nuts to 75 to 85 foot pounds each. This is the same for steel or aluminum wheels. If the wheel secures to the hub using bolts instead of lug nuts then it would be the…

view full answer...

Are Americana Trailer Wheel AM20234 Hot Dip Galvanized Finish

Product Page this Question was Asked From

Continue Researching