Replacement HitchLock and Hitch Pin for Yakima Y02484 HangOver 4 Bike Rack

Question

Question:

Hello I am looking to buy a hitchlock to replace the one I lost for my Yakima hangover 4 bike crack at the same time I thought I would buy an extra hitch pin I’m wondering which 2 parts to order for the Yakama hangover rack rack 4. Thanks

asked by: Shanna L

0

Expert Reply:

I'd be happy to help you with that.

You'll need the # Y52FR hitch bolt along with the # Y07235 HitchLock. Both are compatible with your # Y02484 Yakima HangOver 4 bike rack.

expert reply by: Mike L

0

Answer 1

Yakima has a few different anti-rattle threaded hitch bolt designs and the one you want for your Yakima EXO SwingBase Swing Away Hitch Extender #Y34VR is part #Y52FR on our site. This is the same as the 8880953 you mentioned, it just has our part…

view full answer...

Answer 2

Yes! We do have those parts for your Yakima SwingBase #Y34VR. The replacement parts you need the Replacement Anti-Rattle Hitch Bolt and Washer for Yakima HangOver Bike Rack #Y52FR (Yakima part 8880953) and the Replacement Hitch Bolt Threaded Insert…

view full answer...

Answer 3

The easiest way to determine which bolt you'll need is by locating which Yakima model you've got. You should be able to locate the model of rack from a sticker somewhere on the lower half of the mast or on the hitch shank-but sometimes those…

view full answer...

Answer 4

Both of the bolts that come with the Yakima Hitch Pin Set #Y8880131 are 1/2 inch diameter with 13 threads per inch. One is 4.279” long and the other is 2.598” long.

view full answer...

Answer 5

Yes, the Replacement Anti-Rattle Hitch Bolt and Washer for Yakima HangOver Bike Rack #Y52FR is the correct replacement hitch bolt for the Yakima Exo System #Y82VR. The #Y52FR is the same as part number 8880953.

view full answer...

Answer 6

I checked with Yakima and for the Exo Swingbase part #Y34VR the correct replacement hitch pin bolt is the part #Y52FR.

view full answer...

Answer 7

For the now-discontinued Yakima FullSwing hitch bike rack 8002403 you can use anti-rattle mounting hardware kit #Y8780022. This includes a hitch bolt, nut, clip and anti-rattle insert.

view full answer...

Answer 8

Yes, we can ship the Space Dock 2" Receiver Adapter for Torklift Palomino Landing Pad Bumper part #TLA7900 to you in Canada! However, the quoted shipping costs does not include all brokerage fees and duties. Taxes are not included and all prices…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Replacement HitchLock and Hitch Pin for Yakima Y02484 HangOver 4 Bike Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching