Side Mounted Chain Hangers for Weight Distribution Systems
Question:
I only have about 25 or 26 inches from the center of the ball down the A frame of the trailer. How long are the spring bars? Or, what is the minimum distance from the ball to the spring bar bracket where it mounts to the frame of the trailer? The picture shows what dimension I am talking about, I just need a system that only needs about 25”. Or if there are parts I can purchase to make the Curt 17062 work- the problem with the Curt is the brackets that hold the chain can not be placed far enough back because the trailer box gets in the way. Does Curt have a different bracket that just mounts to the side of the frame and does not need to go over the top of the frame? Thanks
asked by: Kevin K
Helpful Expert Reply:
Thanks for the picture. The spring bars on the Curt Weight Distribution System item # C17062 are 30-5/8 inches. Since this is way past your 25" requirement, you will want to use the Reese Chain Hangers for Weight Distribution Systems item # RP58305. These hangers bolt to the side of your tongue and do not go over the top. The hanger dimensions are 5" wide x 3-5/16" tall and bolt on with four bolts that are 3-1/2" long. The mounting hook for the chains is in the center of the bracket. I have linked an installation video below along with a diagram of the Curt spring bars.
(click to enlarge)
(click to enlarge)
Products Referenced in This Question
Chain Hangers for Reese Weight Distribution Systems - Bolt On
- Accessories and Parts
- Weight Distribution Hitch
- Chain Hangers
- Reese
more information >
Product Page this Question was Asked From
Curt MV Weight Distribution System w/ Friction Sway Control - Round Bar - 10K GTW, 1K TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Does Not Allow Backing Up
- 900 lbs
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Video: Reese Weight Distribution System Chain Hangers Installation
- Shop: Curt MV Weight Distribution System w/ Friction Sway Control - Round Bar - 10K GTW, 1K TW
- Search Results: chain
- Search Results: 516 chain
- Shop: Chain Hangers for Reese Weight Distribution Systems - Bolt On
- Shop: Chain Hangers for Curt Weight Distribution Systems - Bolt On
- Search Results: curt parts
- Shop: Curt Short-Arm Weight Distribution System with Sway Control - Trunnion Bar - 15K GTW, 1.5K TW
- Shop: Curt TruTrack 2P Weight Distribution System w/ Sway Control - No Shank - 10K GTW, 1K TW
- Shop: Curt MV Weight Distribution System w/ Friction Sway Control - Round Bar - 14K GTW, 1.4K TW
- Shop: Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 8,000 lbs GTW, 800 lbs TW
- Search Results: curt weight distribution shank
- Search Results: curt shank
- Article: 5 Things to Know About Weight Distribution Hitches
- Search Results: weight distribution hitch
- Shop: Suspension Enhancement
- Video: Review of B and W Fifth Wheel Installation Kit - Custom - BWRVK2402
- Q&A: Adjustable Ball Mount Recommendation for 2021 Ford F-250 with 2.5 inch Hitch
- Q&A: Can B and W Companion Hitch BWRVK3370 Fit 2021 Ford F-250
- Video: Review of Reese Weight Distribution - WD Only - RE44FR
- Shop: Fifth Wheel Hitch
- Search Results: air bags
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Comparing B&W Continuum And Reese Strait-Line Weight Distribution Systems
- Article: Determining Trailer Tongue Weight
- Shop: Gooseneck Hitch
- Shop: Trailer Hitch
- Q&A: Recommended Offset Gooseneck Hitch Ball for the Ford Factory Puck System
- Video: EcoHitch Hidden Front Mount Trailer Hitch Installation - 2021 Ford F-250 Super Duty
- Article: Which Sway Control Hitch is Right For Your Trailer?
on Weight Distribution Hitch
