Can The Fastway Universal Coupler Lock # DT25013KA Be Keyed Alike With Fastway Receiver Lock

Question

Question:

can item DT25013KA be keyed alike with item FA86-00-3050 or does this just apply to multiple hitch locks? Thanks,

asked by: Ken S

1

Helpful Expert Reply:

When it comes to The Fastway Trailer Hitch Receiver Lock - 2 inch Hitches - 5/8 inch Diameter - Qty 1 # FA86-00-3050 can be keyed alike. You would have to purchase the receiver lock first then when you receive the part get the key number. Then you call back in and buy the other item and tell us what key number you would need, and we could send you the correct one.

The The Fastway Universal Trailer Coupler Lock for 1-7/8 inch, 2 inch and 2-5/16 inch Couplers # FA86-0015-317 is already keyed alike. All of the part # FA86-0015-317 will come with the key number 317, all of the part # FA86-0015-317-303 will have key number 303, and so on. You could order as many of one part number that you like and they will all be keyed alike. We have many key numbers to choose from.

I attached a review video link below.

expert reply by: Noah E

1

Answer 1

The Fastway Trailer Hitch Receiver Lock part #FA86-00-3050 does not have a keyed alike option but we do have the etrailer Trailer Hitch Receiver Lock part #e98880 which does and is very similar.

view full answer...

Answer 2

We aren't manufacturers of those parts, and we don't have the testing ability in house, so I reached out to a couple of our manufacturers to see what information they could provide to try and help. I reached out to my contact at Curt…

view full answer...

Answer 3

We do have photos for you to check out of a Volkswagen Tiguan with the Draw-Tite Trailer Hitch Receiver #DT53GR. I have added photos for you below of a Tiguan with the ##DT53GR, and as you can see the hitch is concealed with only the receiver…

view full answer...

Answer 4

I have a solution for you that is a little higher capacity than the #AM10501 that you asked about. You could use the ST235/85-16 tires in a load range G such as #TTWPRG235R16 which is rated for 4,400 pounds at 110 psi. Four of these would have an…

view full answer...

Answer 5

The Trailer Hitch Adapter #e93YR is the closest extender/riser to the Trailer Hitch Extender #e68YR you found. The adapter does change from the 1-1/4" receiver to a 2" receiver for the accessory. You would need the Reducer #e63YR to get…

view full answer...

Answer 6

Based on the picture that you sent in, it looks like the top part of the shank attaches to the bike rack and the bottom portion, the part you are holding, looks like it is 1-1/4 inches and inserts into your hitch. You can find the size of your shank…

view full answer...

Answer 7

I will start by confirming that both the etrailer hitch item #e25TR and the Curt hitch item #C67JR fit your 2023 Subaru Outback Wagon. They are custom fit and bolt to your Subaru with included hardware. Both the etrailer and Curt hitches are…

view full answer...

Answer 8

The best hitch lock option we have available to the length you are needing is our etrailer.com Trailer Hitch Receiver Lock #e98881. This extra long lock is designed to fit 2 inch and 2-1/2 inch trailer hitch receivers. It has a usable span of 3-5/8…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...