Manual A-frame Jack Replacement for Lippert Electric Trailer Jack

Question

Question:

What would be the manual style replacement jack for this that has same bolt pattern

asked by: Joseph M

0

Expert Reply:

The closest equivalent manual jack, to the Lippert item # LC285318, would be the Buyers Products A-Frame Jack w/ Support Foot - 15" Travel - 5,000 lbs item # 3370091265. This jack has the standard A-Frame jack 3" diamond pattern. I have attached a diagram below.

expert reply by: Jerred H

0

A frame dimensions
(click to enlarge)

Answer 1

If you're referring to the Lippert Quick Drop Tongue Jack part #LC733926, we don't have a replacement set screw or drive for this jack as they are not offered from Lippert as replacement parts. I would suggest you try your luck at a local…

view full answer...

Answer 2

We have one sidewind A-frame jack with a 2 inch outer diameter tube, part #DL22530. This is a 1,000 pound jack from Dutton-Lainson that has 15 inches of travel. I've linked a video of the jack for you as well.

view full answer...

Answer 3

I have good news, our trailer jack that has a 2 inch outer diameter part #DL74MR would fit and work well. While it has a 1,000 lb weight capacity that does not mean 1,000 lb total trailer weight capacity. That capacity is the tongue weight capacity…

view full answer...

Answer 4

If you take a look at the diagram I've provided for the Replacement Power Switch for RAM Electric Trailer Jack with Footplate #EJ-3520-PSW which goes to the Electric Jack w/ Footplate #EJ-3520-WBX, you'll be able to see how both of the…

view full answer...

Answer 5

Yes, the Stromberg Carlson Electric Trailer Jack #JET-5000 is an excellent option for you. It is capable of lifting a trailer up to 18" with up to 5,000 lbs. of tounge weight. In comparison to the Atwood Premier Performance Series Power Jack w/…

view full answer...

Answer 6

We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer jacks. I'm…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

I contacted the manufacturer about the lengths for these stabilizer jacks and have included the information they were able to provide me. The Ark Drop Down Corner RV Stabilizer Jacks #ARK34FR are 422 mm (16.6") collapsed and 600mm (23.6")…

view full answer...

Answer 9

Your typical electric jack is designed to fit an A-frame so the only one we carry that is a side mount is the Fulton XLT #F141401. However, you may be interested in the Trailer Valet JXS Drill Powered Swivel Trailer Jack #TV64FR. This jack has a hand…

view full answer...

Answer 10

We do have the panels separately. What you're looking for is the Go Power Overlander Expansion Kit - 200 Watt Solar Panel #34282182.

view full answer...

Manual A-frame Jack Replacement for Lippert Electric Trailer Jack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching