2020 Honda Ridgeline Towing Mirror Recommendation

Question

Question:

Is the CIPA Universal Fit Towing Mirrors - Strap N, Item #40375-2 the only towing mirror you guarantee to fit 2020 Honda Ridgeline RTL?

asked by: Karen S

0

Expert Reply:

For your 2020 Honda Ridgeline we do have only universal type fit tow mirrors available like the set you referenced which will fit, but if you wanted my recommendation as your best fit I would go with the K-Source tow mirrors part # KS69ZR which install in a more secure way and provide a more stable viewing angle behind you.

expert reply by: Jameson C

0

Answer 1

There are really only two types of towing mirror options for a 2020 Honda Ridgeline, clip-on and clamp-on. If you have already tried the clip-on then the next option you'll want to try is clamp-on, the CIPA Universal Towing Mirrors part…

view full answer...

Answer 2

The only option for towing mirrors on your 2022 Honda Ridgeline is universal towing mirrors like the K-Source Universal Towing Mirror #KS3891-2. Unfortunately there are no custom fit mirrors available. This is designed to fit most mirrors that are…

view full answer...

Answer 3

For your 2021 Honda Ridgeline I recommend the K-Source Universal Dual Lens Towing Mirrors - Clip On - Pair Item #KS3990 as it is held onto the mirror with ratchet straps that can easily adjust to your mirrors. The Honda Ridgeline uses the same…

view full answer...

Answer 4

I have a solution for you but there are no custom towing mirrors for the 2019 Honda Ridgeline like the CIPA set you mentioned. Your best option is a universal towing mirror set, #KS3990. They will fit most stock side mirrors that are 4-1/2" to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

The best hitch for a 2024 Subaru Outback is the etrailer item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 350 lbs…

view full answer...

Answer 9

Hey Donald, the best Blue Ox weight distribution would be the pat #BXW0550 as it has a perfect tongue weight range for your 450 lb tongue weight trailer.

view full answer...

Answer 10

Yes, we have the K-Source Universal Towing Mirrors #KS69ZR which will fit your 2024 Toyota Tundra. These towing mirrors are easy to install, has mirror face dimensions of 7-3/4" tall x 5-1/8" wide, and has rubber pads on the straps to avoid…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...