Does Draw Tite Hitch 75751 Fit 2008 Ford Escape Hybrid Fit Full Size Spare

Question

Question:

I have a 2008 Ford Escape Hybrid, and was wondering if this hitch kit allows me use a full sized spare tire.

asked by: Justin

1

Helpful Expert Reply:

Yes, the Draw Tite hitch part # 75751 that fits your 2008 Ford Escape Hybrid does allow you to use a full size spare.

expert reply by: Jameson C

1

Answer 1

As the 2012 Ford Escape does not appear to have originally come with a full size spare tire, I cannot say with 100% certainty. However, I can supply some rough measurements of the wheels that would usually come with this vehicle as a comparison,…

view full answer...

Answer 2

You can use any of the trailer hitches we offer on your 2010 Ford Escape XLT without tow package. The absence of a factory hitch or tow package does not limit the options for you. With that said, you have numerous options. Basically, there are two…

view full answer...

Answer 3

The trailer hitch receiver I recommend for your 2010 Ford Escape is the etrailer Trailer Hitch Receiver #e56AR. I like the #e56AR because of its matte black finish that hides the inevitable dings, scuffs, and scratches better than any other option.…

view full answer...

Answer 4

Yes, we do have a direct replacement for your Carrier Air V Rooftop Air Conditioner, the Advent Air Replacement RV Air Conditioner for Carrier Setup part #ACCAR150 for white or part #ACCAR150B for black. These units are both 12-13/16" tall which…

view full answer...

Answer 5

The Carrier Air V RV Air Conditioner is no longer produced so a direct replacement of the same unit is not an option. However, we do have available the two Advent AC models that are designed as replacement units for the Carrier Air V. I recommend…

view full answer...

Answer 6

Because trailer wiring harness #118551 requires a direct connection to the vehicle battery, the power wire will be energized all the time because it is connected to the battery. However, with nothing drawing power on the 4-Way end that power has no…

view full answer...

Answer 7

I'd recommend a Curt Class III receiver for your Escape. Curt makes a great product with a durable powder coat finish. The hitch you need will depend on if your Escape is already equipped with the factory 1-1/4 inch hitch. If it is, you'll…

view full answer...

Answer 8

The Draw-Tite Max-Frame Trailer Hitch Receiver part #75751 is Class III hitch with a 2" receiver tube opening. It has a maximum gross trailer weight (GTW) rating of 4,500 lbs and maximum tongue weight (TW) rating of 675 lbs. While using a weight…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...