Replacement Monitor for a Furrion FOS05TADS Monitor

Question

Question:

Does Part # FR77FR replace Furrion Model FOS05TADS? Thanks!

asked by: Vandy D

1

Helpful Expert Reply:

Yes, the Replacement 4.3" Monitor for Furrion Vision S Wireless RV Camera System # FR77FR can be used to replace the FOS05TADS.

You could also use the # FR97FR for a 5" monitor or the # FR47FR for a 7" monitor.

expert reply by: Scott S

1

Answer 1

I do have an option for you but we do not offer a replacement shock absorber for the B&W Companion OEM 5th-Wheel Hitch part #BWRVK3300. The option we do have however is a new head, the Replacement Head Assembly for B&W Companion 5th…

view full answer...

Answer 2

No you will not grease or otherwise lubricate the Reese friction sway control pads #58512. Doing so would severely reduce the functionality and you would basically have no sway control!

view full answer...

Answer 3

We have heard of this issue before on the Lippert Ground Control systems #LC358590. Here is the recommended procedure for clearing the error code: Extend all jacks at least 6 inches. Then press and hold the RETRACT button until the jacks begin…

view full answer...

Answer 4

Yes, you can use the camera from your 4.3" monitor with the Replacement 7" Monitor for Furrion Vision S Wireless RV Camera System part #FR47FR, just go through the pairing process and you're good to go.

view full answer...

Answer 5

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from…

view full answer...

Answer 6

If you're having trouble with the shock absorber on your B&W Companion OEM 5th-Wheel Hitch for Ford Super Duty Prep Package #BWRVK3300, then the only solution is to replace the entire head as replacement shock absorbers are not…

view full answer...

Answer 7

I reached out to Furrion and if the 5" monitor included in the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen #FOS05TASF installed in your 2020 Forest River RiverStone 39FK is not…

view full answer...

Answer 8

Based on the issues you are describing there is something wrong internally with your monitor. Unfortunately there isn't much you can do to fix the internal components of the monitor. I recommend reaching out to Furrion and going through…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Replacement Monitor for a Furrion FOS05TADS Monitor

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching