Wet Bolt Kit for Use with MORryde CRE3000 Kit

Question

Question:

Do you carry the wet bolts for a Morryde cre3000 suspension?

asked by: Duane E

0

Expert Reply:

MORryde has wet bolt kits for use with the CRE3000 kits like with the part # MR46ZR which has shackles that are 2-1/4 inches long and part # MR76ZR which comes with shackles that are 3-1/8 inches. These kits also come with bushings, shackles, and nuts.

expert reply by: Jameson C

0

Answer 1

Thank you for all of that information and we do indeed have the exact wet bolt you are looking for, which is the following part: - Replacement Wet Shoulder Bolt #LC126238

view full answer...

Answer 2

The correct wet bolt/ shackle upgrade kit for your MORryde CRE/3000 axle will depend on the length of your current shackle links, measured center hole to center hole. For 2-1/4 inch shackle links, use #MR46ZR or for 3-1/8 inch shackle links, use…

view full answer...

Answer 3

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…

view full answer...

Answer 4

Well shackle length is mainly based on the height difference between the front and rear hangers. The rear hanger normally doesn't hang as low as the front so that the shackle can offset the difference and add the ability to move. What is the…

view full answer...

Answer 5

The side plates of the B&W gooseneck trailer hitch #BWGNRK1313 will mount on the outside of each frame rail of your 2004 Dodge 2500 8-foot bed. See the B&W video I included at the 7 min and 30 second mark. If your Firestone air bags like…

view full answer...

Answer 6

Your air bag mounting location will determine compatibility with the Gooseneck trailer hitch #BWGNRK1313. The side plates of the gooseneck trailer hitch #BWGNRK1313 will mount on the outside of each frame rail. See diagram to the right and video…

view full answer...

Answer 7

We have the Bolt #LC126197 which is the bolt used for the shackle links. We also have the Bolt #LC126238 which connects the leaf springs to the hangers. The 7/16"-20 Flange Nut #LC122103 will fit both of these bolts. These are the parts for the…

view full answer...

Answer 8

Yes, the MORryde Suspension Upgrade Kit #MR46ZR can certainly be used with the Lippert Road Armor Equalizers. You will just want to be sure that the stock shackle links on your 2021 Cougar 29RKS are 2-1/4" long when measured center hole to…

view full answer...

Answer 9

Yes, the MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps #MR76ZR will fit with the Equa-Flex system on your Grand Design.

view full answer...

Answer 10

The MORryde Wet Shoulder Bolt #MR52HR and Lippert Equa-Flex Wet Shoulder Bolt #LC126197 are identical in in size. The only difference I can see is the one comes from MORryde while the other comes from Lippert. Both have a length under head of…

view full answer...