SumoSprings Compatible With Hellwig Helper Springs On a 2021 Ford E-450 Class C Motorhome Chassis

Question

Question:

I have a Ford 2021 E450 Entegra Motorhome with Hellwig helper springs. What Sumo springs do I need for front and rear. part # and color please Thanks for your help

asked by: Steve M

0

Expert Reply:

With having the Hellwig helper springs on your 2021 Ford E-450 Entegra Class C Motorhome it will limit you to 2 kits from SumoSprings. The only difference in these kits is going to be the color of the springs which defines their weight capacity.

Yellow SumoSprings Solo Custom Helper Springs # SSR-130-54 2,800lb capacity
Black SumoSprings Solo Custom Helper Springs # SSR-130-47 1,500lb capacity

expert reply by: Bud M

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The air suspension system on your 2022 Ram 2500 limits your options for suspension enhancement. None of the air bags made for your truck will be compatible. Instead, I recommend adding the SumoSprings Rebel Custom Helper Springs #SS64VR. The…

view full answer...

Answer 4

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 5

There isn't a leaf spring helper system that is able to be used on your 2022 Ford E-450 combined with the SumoSprings Maxim Custom Helper Springs #SSR-106-47-1. Reason why is these mount on top of the leaf spring pack so a leaf spring helper like…

view full answer...

Answer 6

The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to where…

view full answer...

Answer 7

Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…

view full answer...

Answer 8

Between the two part numbers #SSR-130-54 and #SSR-130-47 the key difference is the amount of support each will provide for your 2021 Ford E-450 Class C motorhome. The 47 provides 1,500 lbs of additional support whereas the 54 provides 2,800 lbs. To…

view full answer...

Answer 9

Yes, there are SumoSprings that fit your 2021 Ford E-450 cutaway chassis, and what you need is the following: - SumoSprings Solo Custom Helper Springs - Rear Axle #SSR-130-54

view full answer...

Answer 10

We do have an option to upgrade the support for the rear suspension on your 2021 Ford E-450 cutaway chassis, and the best option that will fit are SumoSprings: - SumoSprings Maxim Custom Helper Springs #SSR-106-47-1 The #SSR-106-47-1 have a 5,000 lb…

view full answer...

Answer 11

I recommend starting with the Roadmaster Rear Anti-Sway Bar, #RM-1139-147. This will reduce side-to-side movement for a noticeable improvement in your vehicle's stability and reduced body roll. For the front, I recommend the Timbren Front…

view full answer...

Answer 12

The install of the Roadmaster Exact Center Steering Stabilizer part #RM47MR does not require more than 150 ft lbs of torque. It's not a great idea to use a torque wrench as a breaker bar to loosen hardware. And I'm saying that as someone who…

view full answer...