Picking Out Wheel Covers for 2004 Damon Challenger Class A Motorhome

Question

Question:

the front wheel cover that I have has six nut covers attached to the cover the other two are for the screw nuts that hole on the cover to the wheel. I have several nut covers that are dented and I would like to replace them. I f I remove the damaged covers will the covers work??

asked by: Chris A

0

Expert Reply:

If you can let me know what the diameter of your wheel is I can see what wheel cover you'd need to replace it. For example, I can tell your wheel has an 8 lug bolt pattern so for an option for a 16-1/2 inch wheel the Wheel Masters kit part # WM3165B0 would work great and comes with hoses to make accessing the valve stems easier.

expert reply by: Jameson C

0

Customer Wheel Cover
(click to enlarge)

Answer 1

Typically if the Roadmaster Even Brake Portable Supplemental Braking System #RM-9400 is having a leakage issue it's either the Air Cylinder #RM-452109-10 or the exhaust valve #RM-450601-50, with the exhaust valve usually being the number…

view full answer...

Answer 2

To use the Roadmaster Even Brake Braking System, #RM-9400, in your 2011 HHR, you will simply install the braking system using the installation instructions that came with the Even Brake system. The only difference in the installation is that you will…

view full answer...

Answer 3

Can you send those pictures as a reply to this e-mail?

view full answer...

Answer 4

Lug nut covers such as the Wheel Masters Lug Nut Covers #WM8012 are not described as "one-time use" but these use friction to stay on so once they are taken off they will definitely be loose and may not be able to stay on, which means you…

view full answer...

Answer 5

The Wheel Masters Lug Nut Covers - Stainless Steel - 1-1/2" #WM8012 that you were looking at are the closest we have to what you are looking for. These are made to fit over 1-1/2" lug nuts, so you can measure your lug nuts to verify if they…

view full answer...

Answer 6

We do have the 22 mm version of the Replacement 20 mm Lug Nut for Wheel Master Wheel Liner #WMRMT9063. The #WM9062 is what you're looking for. Also yes, the Replacement Wheel Master Lug Nut Cover #WMRMT9061 will fit the 22 mm so you won't…

view full answer...

Answer 7

We have the Replacement Wheel Master Lug Nut Cover for Wheel Liner part #WMRMT9061 available. These are designed to go over the keeper nuts to give you a nice clean look. We also offer a 33mm part #WM9005-6, 7/8" Covers part #WM8019, 1"…

view full answer...

Answer 8

I found your Dicor V160FOLNC lug nut cover, and while we do not have a direct replacement we do have something that is pretty close that should work. Check out the Replacement Wheel Master Lug Nut Cover for Wheel Liner #WMRMT9061. This lug nut cover…

view full answer...

Answer 9

The lug nut cover part #WMRMT9061 is made from stainless steel and could work if you have a 20 mm lug nut on your wheels like the part #WMRMT9063 that this was designed to fit. We do not have anything made from tin though.

view full answer...

Answer 10

If the 33 mm Wheel Masters Lug Nut Covers #WM9005-6 were too big then you may need the 7/8" Covers #WM8019, 1" Covers #WM8010 or the 1-1/16" Covers #WM8011. I'm not sure what size lugs are used for your Workhorse W-22 Chassis but…

view full answer...

Answer 11

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Picking Out Wheel Covers for 2004 Damon Challenger Class A Motorhome

Product Page this Question was Asked From

Continue Researching