Is Hitch Head Centered or Off-Set on Demco Recon 5th Wheel Trailer Hitch?

Question

Question:

Is the head in center of the base or does it have some offset? I cant seem to find any info anywhere.

asked by: Gerry G

1

Helpful Expert Reply:

The hitch head is centered on the Demco Recon 5th Wheel Trailer Hitch, # DM8550043.

expert reply by: Michael R

1

Answer 1

The Demco Recon #DM8550043 is made up of Head for Demco Recon #DM6169 and Base Assembly for Demco Recon #DM6180. These two parts will give you the complete fifth wheel hitch but in two separate orders; otherwise it is the same thing. I've added…

view full answer...

Answer 2

The custom brackets for your 2022 Ford F-250 that are compatible with the Curt A20 5th wheel hitch item #C55DR are the B&W Custom 5th Wheel Installation Kit for Ford item #BWRVK2402. These rails are designed to work with 5th wheel hitches that…

view full answer...

Answer 3

Yes, you can. The Curt 5th Wheel/Gooseneck Custom Wiring Harness item #C57010 was specifically designed for Ford trucks with the aluminum bed. This harness puts a 7-way connector in the bed of your truck and allows you to keep the one on your bumper.…

view full answer...

Answer 4

We have an inverted fifth wheel, part #FW0001 but the Demco you mentioned can't be used like that.

view full answer...

Answer 5

Yes, the RVK2406 is exactly the same as the B&W Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches #BWRVK2402. We left the part number the same on our site for continuity and the #BWRVK2402 will 100 percent fit your 2023 Ford…

view full answer...

Answer 6

If you're referring to the Andersen Ultimate 5th Wheel Hitch Connection you'd actually need to reach out to Andersen directly as we don't carry this. That said, Lippert, the trailer frame manufacturer for most new trailers on the road…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 12

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.

view full answer...

Is Hitch Head Centered or Off-Set on Demco Recon 5th Wheel Trailer Hitch?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching