Custom 5th Wheel Installation Kit for 2022 Ford F-250 Super Duty

Question

Question:

I have a Curt a20 fifth wheel hitch and I am needing some custom 5th wheel brackets for my 2022 Ford F-250 Super Duty.

asked by: Steve M

0

Expert Reply:

The custom brackets for your 2022 Ford F-250 that are compatible with the Curt A20 5th wheel hitch item # C55DR are the B&W Custom 5th Wheel Installation Kit for Ford item # BWRVK2402.

These rails are designed to work with 5th wheel hitches that fit in the industry standard rails like the A20.

expert reply by: Jerred H

0

Answer 1

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 2

The B and W Slider hitch that will fit the Reese fifth wheel rails you have installed in your truck bed is the B and W Patriot part #BWRVK3270 which is a confirmed fit and designed for that style of fifth wheel rail.

view full answer...

Answer 3

Hi Tony; that's a good question and unequivocally the better option is the Curt A20 5th Wheel Trailer Hitch w/ S20 Slider #C55DR. This will not only give you extra height, but won't void the warranty on your trailer frame like the…

view full answer...

Answer 4

To check if your base rails are set to industry standards you'll just measure from the center of one rail to the center of the other. The industry standard spacing is 22". If yours match this measurement then you can use a fifth wheel hitch…

view full answer...

Answer 5

I have included an image below with the measurements for the openings on the Rail Kit #C16411-204 which fits your 2017 Chevrolet Silverado 2500HD. As long as these match both left to right and front to back for the center mounting points on your RBW…

view full answer...

Answer 6

The manually sliding 5th wheel hitch with the most travel that fits the puck system of your Ford F-350 is the Recon from Demco, and is the following part number: - Demco Recon 5th Wheel Hitch w/ Slider #DM24YV This hitch has 14 inches of travel,…

view full answer...

Answer 7

The overall weight is 210 lbs for the Demco Recon 5th Wheel Hitch w/ Slider - Single Jaw - Ford Prep Package #DM24YV.

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

The hitch head is centered on the Demco Recon 5th Wheel Trailer Hitch, #DM8550043.

view full answer...

Answer 10

If you're referring to the Andersen Ultimate 5th Wheel Hitch Connection you'd actually need to reach out to Andersen directly as we don't carry this. That said, Lippert, the trailer frame manufacturer for most new trailers on the road…

view full answer...

Answer 11

Yes, you can. The Curt 5th Wheel/Gooseneck Custom Wiring Harness item #C57010 was specifically designed for Ford trucks with the aluminum bed. This harness puts a 7-way connector in the bed of your truck and allows you to keep the one on your bumper.…

view full answer...