Recommended In Bed 7-Way Connector for a 2023 Ford F-250

Question

Question:

Can I use this Curt Harness to put a 7-way connector in my bed? 2023 Ford F-250. Thanks

asked by: Gregg

0

Expert Reply:

Yes, you can. The Curt 5th Wheel/Gooseneck Custom Wiring Harness item # C57010 was specifically designed for Ford trucks with the aluminum bed. This harness puts a 7-way connector in the bed of your truck and allows you to keep the one on your bumper. This makes hooking up to your 5th wheel or gooseneck trailer easier and more convenient.

I have linked an installation video below so you can see how to get this wiring harness set up.

expert reply by: Jerred H

0

Answer 1

Thank you for all of the information and your photo! It really looks like you've done your research with all of the various solutions you've looked at to try to prevent damaging the connection between your Lance Truck Camper and your…

view full answer...

Answer 2

This can vary greatly depending on the individual and their comfort level or experience with various tools but an estimate is somewhere in the 3 hour mark, give or take. The GRNK1123 does fit a 2023 Ford F-250, F-350, or F450 Super Duty, and our…

view full answer...

Answer 3

The hitch head is centered on the Demco Recon 5th Wheel Trailer Hitch, #DM8550043.

view full answer...

Answer 4

If you're referring to the Andersen Ultimate 5th Wheel Hitch Connection you'd actually need to reach out to Andersen directly as we don't carry this. That said, Lippert, the trailer frame manufacturer for most new trailers on…

view full answer...

Answer 5

The Demco Recon #DM8550043 and Curt CrossWing #C86JR have quite a few differences that separate the two similar designs. The Recon has an extra 1,000lbs of capacity and comes with a 15-1/2", 17-1/4", or 18" height setting.…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 11

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from…

view full answer...

Recommended In Bed 7-Way Connector for a 2023 Ford F-250

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching