Trouble Re-Installing the Center Hitch Cover with the Curt Hitch # CU29FR on a 2021 Buick Enclave
Question:
I just had a hitch installed on my 2021 Buick enclave and now the bumper cover over the hitch area will not fit. What should I do to correct this? This was installed by a certified Curt dealer.
asked by: Charles C
Expert Reply:
Sorry to hear about this! I am guessing you are referring to the Curt Hitch - 2" # CU29FR. If this is the hitch you have installed, the most common issue with not being able to install the center hitch cover over the hitch results from not lining up the rest of the bumper correctly. Any little variation with how the bumper is attached to the rear of your vehicle can affect the fitment of that center piece.
The best route is to remove and re-install the bumper to ensure fitment. I went ahead and attached a video that shows this process. Also, at the very end of the video at timestamp 15:36, it shows the process of putting the bumper back on and installing the center cover. Even though this is conducted on a 2018 Buick Enclave, the process on your 2021 model is extremely similar.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 750 lbs TW
- 5000 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 750 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Q&A: Comparing Draw Tite and Curt Hitch for 2019 Buick Enclave
- Article: My Trailer Hitch Doesn't Fit
- Shop: Front Mount Hitch
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Shop: Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Shop: Curt Mounting Bracket for 4-Pole Flat Trailer Connector
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Video: Curt Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C56394 Review
- Video: Best 2020 Buick Enclave Trailer Wiring Options
- Video: Curt Trailer Hitch Installation - 2019 Buick Enclave
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2020 Buick Enclave C56394
- Q&A: Trailer Hitch and Wiring Recommendation for 2021 Buick Enclave
- Video: Review of Curt 4-Pole Flat Trailer Wiring Mounting Bracket - C42CR
- Search Results: 4 pin adapter
- Search Results: 4 pin bracket
- Video: Choosing the Right Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer hitch
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: hitch
- Search Results: trailer hitch wiring
- Shop: Brake Controller