Equipment Needed to Flat Tow 2022 Jeep Wrangler Unlimited Behind Motorhome

Question

Question:

I want to flat tow my 2022 Wrangler Unlimited behind my motorhome. What parts do I need? My Jeep has the stock bumper.

asked by: Rickey

0

Expert Reply:

I'd be happy to make some suggestions for you.

To safely flat tow your Wrangler Unlimited, you'll need a tow bar, base plates, safety cables, a wiring solution to synch the Jeep taillights with those on the motorhome, a supplemental braking system and possibly a high/low adapter if the installed base plate height and the height of the hitch on the motorhome have a height difference of more than 3 inches.

For a tow bar, I'd recommend the Roadmaster Falcon All-Terrain tow bar, part # RM-522. For base plates, use # RM-521453-5. To wire your Jeep, I'd recommend # RM-15267 or # RM47ZR for Jeep models equipped with the ParkSense active parking assist system. For safety cables, use # RM-643.

For a supplemental braking system, I'd recommend the Demco Air Force One # SM99243 for motorhomes with air brakes or the Demco # SM99251 Stay In Play Duo for motorhomes with hydraulic brakes.

If the installed height of the base plates has a height difference compared to the receiver hitch on the motorhome that's greater than 3 inches, you'll want to use a high/low adapter. I'll link to an article that shows how to measure to determine which adapter you need, as well as to our selection of adapters.

expert reply by: Mike L

0

Answer 1

I can absolutely help you out with choosing the best supplemental braking system for the Winnebago and Jeep Liberty. First, I have included a link to all of the available supplemental braking systems we carry. I usually recommend the Roadmaster…

view full answer...

Answer 2

If you do not already have one, you will first need a brake controller. I can highly recommend the Tekonsha Prodigy P2, part #90885. The P2 is our best selling controller, primarily because it preforms so well and is extremely easy to use. If the…

view full answer...

Answer 3

No, the brake light relay Item #RM-88400 is not used for the 2021 Jeep Wrangler Unlimited because the brake wire cannot be spliced into. Instead you would want to use the Roadmaster Stop Light Switch Kit Item #RM-751490. Now you would only need this…

view full answer...

Answer 4

Both the Roadmaster Direct-Connect Base Plates #RM-521453-5 and the Crossbar-Style Base Plates #RM-521453-4 will fit your 2020 Jeep Wrangler Unlimited perfectly (as long as you have the factory plastic or steel bumper). The difference between the two…

view full answer...

Answer 5

The Blue Ox base plate kit part #BX2409 is a confirmed fit for your 2014 Ram 1500 4x4 and would work great as it installs easily and is very easy to connect/disconnect from. In addition to the base plates, you will also need a compatible tow bar,…

view full answer...

Answer 6

They are not interchangeable but we do have a replacement jumper air hose for the SMI Air Force one with the part #SM99666 if you wanted a backup.

view full answer...

Answer 7

The Roadmaster Direct-Connect Base Plate Kit part #RM-521453-5 is a great option for a 2021 Jeep Wrangler. It can then be used with any Roadmaster motorhome mounted tow bar and not require the use of the crossbar. I recommend the Roadmaster Falcon…

view full answer...

Answer 8

I contacted our Rep at Camco, they stated that the Camco Deluxe Folding Grill Stand, #CAM57293 has a max weight rating of 100 lbs.

view full answer...

Answer 9

To flat tow your 2015 Ram 1500 4x4 you will need a base plate, tow bar, safety cables, towed vehicle wiring, and a supplemental braking system. When I checked the owner's manual, the 4x4 model can be towed 4 down, but you will want to check the…

view full answer...

Answer 10

Thank you for the photo of your set up, and while we do have an option for a high-quality grill that will allow you to cook outside your RV, there isn't a grill that will fit in the exact mounting arm you have. So the best option we can offer is…

view full answer...

Answer 11

The Camco Deluxe Folding Grill Stand part #CAM57293 weighs around 20 lbs while folded and inside the bag.

view full answer...

Answer 12

The RV mounting rail, in reference to mounting a grill, is a strip of metal attached to the outside of an RV or trailer. There is usually a channel in it that the grill hangs from. They are usually OEM equipment but in this case you can use Camco RV…

view full answer...