Hopkins Plug-In Simple Vehicle Wiring Harness Installation - 2017 Subaru Outback Wagon Video

When it comes to locking your Reese Tri-Ball #RP47FR to your hitch I recommend The etrailer Trailer Hitch Receiver Lock for 2 inch Hitch - Flush - 2-5/8 inch Span - Stainless Steel #e98882. The lock has an overall length of 6 inches and has a pin…

The foam panel is in the bumper to help support the bumper panel as well as provide a cushion for the cover if there is a minor collision. Without the cushion the cover will tend to break or crack easier as it does not have the support needed. I have…

We have had some other people have a bit of trouble with the re-installation of the bumper fascia when installing the Draw-Tite Trailer Hitch #76227 or Curt Trailer Hitch #C13410 on your 2017 Subaru Outback. What has been recommended to help resolve…

I went ahead and contacted my tech at Torklift (the makers of EcoHitch) about the #EH97FR, and he confirmed that all M12 hardware will be torqued to 70 ft/lbs and all 1/4" hardware will be torqued to 8 ft/lbs. I went ahead and attached the step…

That is a great question, but I can assure you that the EcoHitch Hidden Trailer Hitch Receiver #306-X7601 will have no affect whatsoever on the rear backup sensors on your 2019 Subaru Outback Wagon, both during installation and when the hitch is…

The Draw-Tite Max-Frame Trailer Hitch Receiver part #76227 which is a fit for a 2010-2019 Subaru Outback will install via eight total 10mm nuts which are actually reused as they are the factory fasteners for the bumper beam. The most up to date…

The EcoHitch trailer hitch, part #306-X7601, does sit underneath the rear bumper so it reduces the ground clearance at the bumper for sure. It installs right up to the fascia on a Subaru Outback Wagon so if you measure from the underside on one down…

The foam piece of the bumper on your 2019 Subaru Outback Wagon does not get re-installed when you are putting on the EcoHitch Hidden Trailer Hitch Receiver #306-X7601. It will interfere with the fitment and in the instructions does specify to remove…

I've linked an install video of the EcoHitch, part #306-X7601, being installed on a 2016 Subaru Outback for you. The tools you need are: Phillips and flat head screwdrivers Ratchet with 10 mm socket Trim Remover, part #ALL648544 Mallet Utility…

One of the neat things about the EcoHitch brand is that they are made from recycled materials (like you noted) which, in turn, are also recyclable. The EcoHitch Hidden Trailer Hitch Receiver #306-X7601 for your 2019 Subaru Outback Wagon only requires…

To install the EcoHitch #306-X7601 on your 2019 Subaru Outback Wagon, you need: - Phillips and Flathead Screwdrivers #PT55ZR - Trim Removal and Pry Tools #ALL648544, #PT73HJ - Ratchet with 10 mm and 14mm socket - Torque Wrench #ALL644044 - Air Saw,…

Trailer hitch #76227 does not come with hardware because it uses nuts already on the 2017 Subaru Outback Wagon. The bumper beam on this vehicle fits over 8 studs in the vehicle frame and is held there with 8 matching nuts. This hitch will be…