Pin Hole Depth of Draw Tite Hitch that Fits 2021 Volkswagen ID 4

Question

Question:

Hi, What is the pin hole depth and the receiver depth? Thanks

asked by: Philippe

0

Expert Reply:

The Draw Tite Hitch part # DT84GR that you referenced that fits your 2021 Volkswagen ID 4 the pin hole depth is 2-1/2 inches which is their standard depth. The backside of the hitch opening tapers up so an exact overall depth is harder to say but it's about 6 inches. Worth nothing is that this is open on both ends.

expert reply by: Jameson C

0

Answer 1

I have a solution for you but there is only one hitch that is confirmed to fit and installed successfully on a 2022 Volkswagen ID 4. It is the Draw-Tite Max-Frame Trailer Hitch Receiver item #DT84GR. This hitch is custom fit and bolts to your ID 4…

view full answer...

Answer 2

I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver #DT84GR as being the best receiver for your 2021 Volkswagen ID 4. It will be easier to install as you do not have to fully remove the bumper beam on your ID 4 like is required with the Curt…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 5

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Pin Hole Depth of Draw Tite Hitch that Fits 2021 Volkswagen ID 4

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching