Sealant and Butyl Tape Install Kit for Maxxan Mini Plus Roof Vent

Question

Question:

Im buying this fan for my tear from you guys..1.what size butyl tape and 2.what leveling stuff do I need to installMaxxFan Mini Plus Manual RV Roof Vent w/ 12V Fan - LED Light - Black - MA00-03851....what do you recommend for install..thanks.

asked by: Michael C

1

Helpful Expert Reply:

We actually have kits that come with mounting hardware, sealant, and butyl tape for roof vents like the MaxxFan # MA00-03851 with the part # 344270KITW which would work great for you.

expert reply by: Jameson C

1

Answer 1

In regards to installing a roof vent like the MaxxAir Mini Deluxe Trailer Roof Vent part #MA00-03851, the white trim piece that connects the top and bottom of the vent is called the garnish and this will be trimmed to fit the exact thickness of your…

view full answer...

Answer 2

We have a similar RV roof vent that comes with a remote but the #MA00-03851 that you referenced does not come with a remote. Instead you'd want the part #MA00-07500K that does have this feature as well as a 10 speed fan instead of a single speed…

view full answer...

Answer 3

The MaxxAir Mini Deluxe Trailer Roof Vent part #MA00-03851 once installed will sit almost flush with the ceiling. The panel which houses the light and control knob I would say is around 1/4" - 1/2" thick so that is all that would sit inside…

view full answer...

Answer 4

The black top of the MaxxAir Mini Deluxe Trailer Roof Vent w/ 12V Fan #MA00-03851 is just under 4 inches tall so with the white base and black top combined, it will sit about 4-1/8 inches above the roof. I've attached a video to help with some of…

view full answer...

Answer 5

I will start by saying there will be no issues using the BedRug Custom Full Truck Bed Liner #BRQ15SCK with a ladder rack or tonneau cover, or both, so you are perfectly good to go. So with that out of the way, we can get into ladder rack and tonneau…

view full answer...

Answer 6

I like the more permanent drill application Fan-Tastic roof vents like the #FV801350 you referenced as they are easier to keep sealed. For an install kit the #344270KITW would work well. This comes with the needed screws and all of the sealant…

view full answer...

Answer 7

For your race trailer with aluminum roof panels it will seal on the edges with a Butyl Tape #AL64UV. Then you will use either a Non-Sag #AL33KV or Self-Leveling #AL68KV sealant to seal the mounting screws and edges of the aluminum roof panels to…

view full answer...

Answer 8

While I have no way to see exactly what leveling system you have on your 2006 Tiffin Phaeton 35DH, I was able to find information on a forum showing someone who did confirm the SnapPad HiWay 10 Jack Pads for HWH and Atwood Leveling Systems w/…

view full answer...

Answer 9

Hey Paul, we have a Blue Ox base plate kit that fits your 2024 Nissan Versa with the part #BX1856. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle.…

view full answer...

Answer 10

Although I would not be able to speak on the installation of the part(s) you received for your trailer, I can tell you that the TremPro 644 Silicone Sealant part #0160297 will do an excellent job of sealing your new aluminum panel to the trailer and…

view full answer...

Answer 11

With a few possible exceptions (large fifth wheels that use LT or Light Truck Tires), we recommended that only trailer tires be used on trailers because they have stiffer sidewalls which do a better job dealing with the vertical load tires experience…

view full answer...

Sealant and Butyl Tape Install Kit for Maxxan Mini Plus Roof Vent

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching