4-Flat Wiring Harness for a 2014 VW Jetta Sportwagen

Question

Question:

I have a 2014 Jetta Sportwagen. I need some trailer wiring for it. Plug and play would be best, but I need something that works. A flat 4 would match my trailer.

asked by: Bradley D

0

Expert Reply:

I have a solution for you but there are no plug and play adapters for your 2014 VW Jetta Sportwagen. For a 4-flat connector you are going to want the Curt Wiring Harness Kit w/ 4-Pole Trailer Connector and Installation Kit item # C59236. This kit works with either LED or incandescent bulbs on both the trailer and vehicle.

expert reply by: Jerred H

0

Answer 1

The Curt Spectrum Brake Controller, part #C51170, will work for your 2010 Volkswagen Golf. With limited space, the option of three separate components can prove to be a benefit. It features seven sensitivity levels that allow you to adjust the…

view full answer...

Answer 2

The trailer wiring harness we offer for your 2015 Volkswagen Golf SportWagen is the Curt Harness, part #C59236. This harness is a hardwire installation so I have attached a drawing that shows how it should be installed. This harness will work with…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

The (discontinued) Tekonsha Powered Tail Light Converter 119190KIT is a universal wiring harness so there aren't any specific instructions when it comes to installing the kit on your 2013 Volkswagen GTI. With that being said, we did get the…

view full answer...

Answer 5

The only hitch that will fit the 2014 Volkswagen Jetta is the Curt #C11474. However, it will not fit the TDI version. If you let me know what you need a hitch for, I could recommend a trunk mounted bike rack for bikes or a roof rack for cargo. Just…

view full answer...

Answer 6

The Curt hitch part #C11474 that you referenced actually replaced the part number 11072 that you mentioned, but it will not fit the TDI version of the SportWagen. That said the only hitch we have confirmed as a fit for the TDI model of a 2014…

view full answer...

Answer 7

The Curt #C11474 does not fit the 2010 Jetta TDI. Instead, we have the EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2" #306-X7284. I attached the installation instructions and an installation video for you to check out.

view full answer...

Answer 8

I'm unaware of any negative effects of installing a standard powered taillight converter like #C59496 on a 2014 Volkswagen Jetta SportWagen. I did look through the owner's manual, and I found where Volkswagen states "Never connect the…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

4-Flat Wiring Harness for a 2014 VW Jetta Sportwagen

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching