Where Can I Find a Local etrailer Installer for the Coil SumoSprings # CSS-1195R?

Question

Question:

I found on your webpage a list of places that could install the above part, I cannot seem to locate it now...Could you tell if your website changed or what the links are? No way I can put this on myself Thank you

asked by: Karen B

0

Expert Reply:

Yes! I can definitely help you find local installers for your Coil SumoSprings Custom Helper Springs for Coil Spring Suspension - Rear Axle # CSS-1195R on your 2017 Nissan Pathfinder.

On each product page under the photos and videos, there is text that says, "Need help with installation? Find local installers near me." After you click that link, you will be able to enter your zip code for a list of local installers. I went ahead and attached a screenshot that shows where this is located.

expert reply by: Bob C

0

How to Find Local Installers
(click to enlarge)

Answer 1

The SumoSprings Maxim Custom Helper Springs - Rear Axle #SSR-183-54-1 can be installed without removing the wheels on your 2014 Tiffin Allegro Open Road 36LA, but it will be more complicated because of restriction working room. I've attached a…

view full answer...

Answer 2

Yes, the SumoSprings Maxim kit part #SSR-280-54-1 would work great to improve the ride quality and handling of your 2005 Workhorse W22 that already has a rear sway bar installed on it. This will further create more stability and get rid of any…

view full answer...

Answer 3

When installing the AirLift 1000 Helper Springs #AL60811, you want to install the spacers at the bottom of the air bag. The original spacer that is included in your kit will be used in combination with the Air Lift Universal Air Spring Spacers for…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 10

Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part #RM-1139-175. I know that's not what you asked about but for motorhomes where most of the…

view full answer...

Answer 11

The air suspension system on your 2022 Ram 2500 limits your options for suspension enhancement. None of the air bags made for your truck will be compatible. Instead, I recommend adding the SumoSprings Rebel Custom Helper Springs #SS64VR. The…

view full answer...

Answer 12

Personally I wouldn't go with Timbren's for your needs. They're essentially rubber bump stops that prevent your suspension from flexing when weights placed on the rear of your Canyon. The major issue with them is comfortability when you…

view full answer...