SumoSprings Maxim Rear Helper Springs Installation - 2005 Workhorse W-Series Video

Yes, the Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes #RM-RBK13-RSSA would be a compatible fit for your 2007 Winnebago Adventurer on a Workhorse W24 Chassis.

I do have suspension enhancement options for a 2002 Workhorse P42 Chassis but there are no air bags available unfortunately. Instead, you can use the Timbren Rear Suspension Enhancement System. The correct one will be based off the suspension. The…

The support capacity of the scissor jacks are for each jack individually. So the part #UF48-979031 comes with two jacks that are each rated for 6,500 lbs. So you'd multiply that by how many jacks you end up using

For your Class A Motorhome you are probably going to want to use the Ultra-Fab Ultra Scissor Jacks part #UF48-979031 instead of the Ultra-Fab Ultra Scissor Jacks part #UF48-979002 as they offer more lift which will be needed. They are designed…

The SumoSprings Maxim Custom Helper Springs - Rear Axle #SSR-183-54-1 can be installed without removing the wheels on your 2014 Tiffin Allegro Open Road 36LA, but it will be more complicated because of restriction working room. I've attached a…

Yes, the SumoSprings Maxim kit part #SSR-280-54-1 would work great to improve the ride quality and handling of your 2005 Workhorse W22 that already has a rear sway bar installed on it. This will further create more stability and get rid of any…

Yes, the SumoSprings Custom Helper Springs Kit #SSF-280-47 that you referenced has been confirmed to work with the leaf spring suspension you have on your 2004 W22 Workhorse Holiday Rambler. I attached a picture that I took from the installation…

For the biggest immediate improvement in ride quality I definitely recommend starting off with a rear sway bar. For your Tiffin RV built on the Workhorse W20 chassis the Roadmaster Anti-Sway Bar #RM-1259-108 will work perfectly. Most of the weight of…

The Sumo Springs front helper springs you need for your 2008 35H Fleetwood Bounder Motorhome will depend on which chassis it's built on. If it's on the Ford chassis, you'd use #SSF-171-40-2. If it's on the Workhorse chassis, use…

I have a possible solution for you, but the Replacement Phoenix USA Rear Wheel Center Cap #PXPH1764 is actually designed to be used on 10 lug applications, not 8 lug. It sounds like Replacement Phoenix USA Rear Wheel Center Cap - 6-1/2" or…

I attached a picture that shows where the heat strip #ACMHD attaches on an Advent AC unit like the #ACCOL135 as well as a review video that shows the install process.

The 2006 Monaco Diplomat 40 PDQ Class A Motor Home that you have will use the Roadmaster chassis. You will need to determine which Roadmaster chassis is used on your motor home to choose the correct RSSA steering stabilzer and brackets. The…