Does etrailer Hitch Fit 2018 Subaru Crosstrek  

You could use a step drill bit in the size of 7/8 inch to 1-1/8 inch which appears to be the size our installer used when installing the etrailer hitch part #e98912 in the install video link I attached.

There are a couple of good anti-rattle options for you, but definitely do not drill a hole into the receiver as it can compromise it. So what you can do is either add a clamp-on style stabilizer, or an anti-rattle hitch pin lock, depending on the…

We do have hitches that fit your 2015 Subaru XV Crosstrek Hybrid which will allow you to use an e-bike rack like the Thule EasyFold XT part #TH903202 that you referenced which is also your best option. The EasyFold is a really great option for…

For your 2018 Subaru Crosstrek, I recommend the Curt Trailer Hitch Receiver #C13382. This Class III trailer hitch is confirmed to fit your vehicle and will provide you with a 2 inch receiver opening and a towing weight capacity of 3,500 pounds. The…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…