Is Just the Drivers Side Bracket and Light Available for the Yakima Tail Light Relocation Kit

Question

Question:

We bought the License Plate and Tail Light Relocation Kit for Yakima EXO System Item # Y74VR last summer and attached it to our EXO hitch unfortunately the knobs that held it on came loose and the driver side bracket with light smashed up. Can you sell just the Drive side bracket with light? Thanks

asked by: P J

0

Expert Reply:

Unfortunately the only way that we have the driver side bracket with light is in the License Plate and Tail Light Relocation Kit # Y74VR.

expert reply by: Scott S

0

Answer 1

The 2021 Toyota Rav4 Prime is more of a premium package that gives you more luxurious features, higher gas mileage and more towing capacity. With those differences after talking with Curt they assured me that you will not need to purchase a hitch and…

view full answer...

Answer 2

What we've found is that even if your license plate was covered with a cargo carrier like the Reese part #63153 you won't get in trouble as it doesn't seem to bother anyone. Also worth mentioning is that this carrier isn't super…

view full answer...

Answer 3

Yes, since your class III hitch has a 2 inch opening, you will be able to use this 24x60 Railed Cargo Carrier for 2 inch Trailer Hitches, part #63153. This cargo carrier measures 12-3/4 inches from the center of the hitch pin hole to the carrier…

view full answer...

Answer 4

We have an LED light kit that can be used with the Reese cargo carrier part #63153 with the part #98174LED but the #STL211XRFHB that you referenced would not fit it.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 12

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Is Just the Drivers Side Bracket and Light Available for the Yakima Tail Light Relocation Kit

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching