What Cover do You Recommend for My 25.6 Foot 2022 Forest River 2516S Mini Lite Travel Trailer?

Question

Question:

Have a 2022 Forestriver 2516S minilite trailer looking for cover that will fit 25.6

asked by: George

0

Expert Reply:

For a great cover for your 25.6-foot 2022 Forest River 2516S Mini Lite travel trailer, I recommend the Adco Olefin HD All-Climate + Wind RV Cover for Travel Trailer # AD77ZR. This particular cover fits travel trailers that measure between 24'1" - 26' long. This particular cover comes with cinch ropes at the front and rear to remove slack and reduce billowing. It also comes with built-in vents to allow air to escape. In order to ensure that the cover has enough height with the 96 inches of height, I recommend measuring your trailer's undercarriage to the top of the natural roof line to make sure it falls below 96 inches.

If you measure your height of the trailer and determine that it is taller than 96 inches, feel free to respond to this answer with your trailer's height, and I will be happy to make another recommendation for you.

expert reply by: Bob C

0

Answer 1

Yes, the Adco Olefin HD cover part #AD77ZR that you referenced does fit your 2020 Gulf Stream 236 RL that you referenced. It will give you a snug fit like you are wanting and it has plenty of adjustable straps to get it as tight as possible as well.…

view full answer...

Answer 2

Because the Timbren suspension systems like the #TFRTT1504E you installed operate more as a longer bump stop, driving in conditions like you've mentioned and with the spring not engaged to the axle while under load, you're going to get a…

view full answer...

Answer 3

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 4

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

When measuring for a trailer cover you want to measure from the front of the trailer box, not the tongue, to the rear including anything that is attached to the rear. This will include a spare or a ladder at the farthest edge at the rear of the…

view full answer...

Answer 7

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Answer 8

Yes, the Adco Olefin HD travel trailer cover part #AD97ZR does for sure fit your 2015 Jayco X20E. We have confirmed this with Adco.

view full answer...

Answer 9

Personally I wouldn't go with Timbren's for your needs. They're essentially rubber bump stops that prevent your suspension from flexing when weights placed on the rear of your Canyon. The major issue with them is comfortability when you…

view full answer...

Answer 10

Hi there David; we do have truck camper jacks that can work for your F-250 with a lift and large tires. What you can use are camper jacks from Brophy, which have a 17" to 67" lift range, which is the highest possible lift height. There are…

view full answer...

Answer 11

Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…

view full answer...