LaSalle Bristol XTRM Roof Installation Kit Review Video

The 2570 is the Roadmaster Comfort Ride Slipper Spring System for tandem axle trailers and the 2570-50 is an add-on kit for triple axle trailers. For example, the #RM-2460-2570 you were looking at is for tandem axle trailers while the…

The LaSalle Bristol XTRM roof membrane, part #3441700534142711435, is 27 MIL which makes it about 0.68 mm thick.

The thickness of the TPO Alpha Membrane, like the Alpha Systems Superflex TPO RV Roof Membrane #AL92CV is 30 (0.03") mil thick. This particular membrane measures 35' long, is 9-1/2" wide, and covers 332-1/2 square feet.

The LaSalle Bristol RV Roof Repair Kit #344270KIT30 uses the 30 foot long membrane roll- part #3441700534142711430, which is 9-1/2 feet wide. If your roof is 9'-6", then this will be the exact width of the roll.

We don't carry the Lasalle Bristol XTRM non sag sealant #34427034147-1 in gray but we do carry the Alpha Systems Alpha Thane 5160 Non-Sag Sealant for RVs - Gray - 98oz - Qty 1 Item #AL83KV. Just like the LaSalle Bristol brand the Alpha will…

We have the kit part #3442703414KIT which comes with everything needed to install roof membrane like the #3441700534142711435. The kit includes a 2-gallon container of EXP90 adhesive, six 10-oz cartridges (300 linear feet) of XTRM 100 self-leveling…

You do want to remove all of the old sealant before installing the LaSalle Bristol XTRM PVC RV Roof Membrane - White - 35' x 9-1/2' #3441700534142711435. While I know it can be a pain, some patience and a putty knife will go a long…

Yes it will accept PVC adhesive, the felt backing will soak it up and help create a strong connection/bond. The adhesive has a longer life span than butyl tape and it is cleaner than using caulk or other sealants. It will need to be treated with…

The LaSalle Bristol XTRM EXP 90 Adhesive for RV Roofs #344270341415 must be applied to a clean and porous surface. So you will not be able to apply the adhesive to itself. You must either sand the surface clean or apply the new roof sheathing.

I checked with my roof installer, and got a hold of a sample of the LaSalle Bristol #3441700534142711435 myself, and found out that either side can be glued down. There is no up or down. Both sides are identical. This membrane is glued down with…

You'll want to let the LaSalle Bristol XTRM Adhesive #344270341415 dry for 12 to 15 hours.

To get right seal you'll need to remove a portion of the seal to get the side profile of your current seal. There are multiple types of applications for slide-out seals; Glue On, Peel-N-Stick, Press In, Push On, and Slide-On. There are…