Do Ultra-Fab Steel Jumbo Roller for Trailers UF48-979023 Have Weight Capacity

Question

Question:

How much weight capacity for these wheels

asked by: Juan D

0

Expert Reply:

The Ultra Fab roller part # UF48-979023 do not have a weight capacity. My contact at Ultra-Fab said that because these rollers are not meant to sustain weight for extended periods of time, they do not have a weight capacity stated.

expert reply by: Jameson C

0

Answer 1

We have shock #LC283280 but its compressed length is 8-5/8 inches. We are measuring that from inside washer to inside washer though so if you are measuring differently it is possible that this shock will work. I have linked a video of this shock for…

view full answer...

Answer 2

When installing a shock kit like the Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 5,200-lb to 7,000-lb (3") Axle #LC281281 or using the #LC283280 you will want to install the shock so the lower connection to the axle U-bolt plate happens…

view full answer...

Answer 3

The Lippert Heavy-Duty Replacement Shock #LC283280 does included new rubber bushings, washers and nuts to mount to the shock. Be sure that your brackets are spaced properly to accept these shocks. The shocks have a compressed length of 8-5/8"…

view full answer...

Answer 4

While we don't have any coated skid wheels that would prevent the concrete damage we have a solution that might prevent the dragging all together by lifting the suspension of the trailer. The part #LC425750 will lift a single axle trailer 1.88…

view full answer...

Answer 5

Most likely we have parts that will be compatible with your Fayette axles but unfortunately I wasn't able to locate any specific information for the axles on your trailer using the numbers that you found on the tag. If they are round axles you…

view full answer...

Answer 6

The best way to determine which replacement shocks will work is by matching up the length of the old ones as close as possible and then also using the GVWR of the trailer. If your brackets are 12-1/2" apart, and the GVWR of your trailer is…

view full answer...

Answer 7

Thank you for providing a photo diagram of your 5th wheel rear frame area where you are intending to install Ultra-Fab Steel Micro-Roller Skid Wheels #UF48-979021. The best location to weld on these rollers is at or just behind the point where the…

view full answer...

Answer 8

The very best hitch for the Ram Factory Prep Package is the B&W Companion OEM 5th Wheel Hitch for Ram Towing Prep Package - 25,000 lbs #BWRVK3600. This hitch fits directly into the factory pucks for a very clean and custom fit. The base can be…

view full answer...

Answer 9

I have never head of anything like that but I guess it isn't out of the realm of possibilities. You'd just have to make sure that your trailer frame is lifted high enough that these tires don't touch the ground if that's what…

view full answer...

Answer 10

I reached out to my tech contact at Lippert and the Standard Replacement Shock - Black #LC283271 doesn't have a rated capacity but is designed only for use on 2-3/8 inch diameter axles. That axle size is the 3,500 lb axle, so seeing as they are…

view full answer...

Answer 11

If you are looking to add shocks then measure using the following procedure: Compress the shock all the way (A) then mark the inner leg where the outer leg stops. Then release compression and measure the stroke (how far the shock moves) (B). Then…

view full answer...

Answer 12

The B&W Companion OEM 5th Wheel Trailer Hitch w/ Slider is a great hitch for those with short bed trucks. The #BWRVK3670 model is a confirmed fit for the 2021 Ram 2500 with the OEM Ram Towing Prep Package (the puck system). If you have the puck…

view full answer...

Do Ultra-Fab Steel Jumbo Roller for Trailers UF48-979023 Have Weight Capacity

Product Page this Question was Asked From

Continue Researching