What Roof Rack Do You Recommend For My 2022 Volvo XC40 To Carry A Thule Hullavator And Kayak

Question

Question:

I am getting a new car soon, and want to use it with a Hullavator. What would be the quietest set up that youd recommend for me? I will also need cross bars, so either Yakima or Thule bars so long as they work with the Hullavator are options.

asked by: Vanessa

0

Expert Reply:

My roof rack recommendation for you will consist of a Yakima roof rack and the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs - Side Loading, part # TH898. The Hullavator will not work unless there is between 4" and 8" of crossbar extension beyond the towers/feet. Yakima roof racks are easier to setup with that extension. Your Yakima roof rack will consist of the following items:

Thule WingBar Evo Crossbars - Aluminum - Black - 53" Long - Qty 2, part # TH711420
Evo Flush Rail Feet for Thule Crossbars - Flush Side Rails - Qty 4, part # TH710601
Fit Kit for Thule Evo Flush Roof Rack Feet - 186010, part # TH186010
Thule One-Key System Lock Cylinders - Qty 4, part # TH450400

This roof rack has a weight limit of 165 lbs. The Yakima CoreBar Crossbars are elliptical in shape, so they will help reduce wind noise AND aid in fuel efficiency. I have included the Yakima Same Key System Lock Cores so you can secure your roof rack to your vehicle. Once this is in place, you can install the Thule Hullavator.

I have included product description links and video review links below.

expert reply by: Mark Smith

0

Answer 1

Yes, the Thule DockGrip Kayak and SUP Carrier with Tie-Downs #TH895 comes both with clamps for around your crossbars as well as the T-Bolts that fit into the slots on the top side of roof rack crossbars.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 6

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 9

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 12

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...