Can the Thule DockGrip Kayak and SUP Carrier be Installed Using T-Bolts

Question

Question:

Does this product come with the Mount that slides into the bars rather than the universal mount?

asked by: Tom C

1

Helpful Expert Reply:

Yes, the Thule DockGrip Kayak and SUP Carrier with Tie-Downs # TH895 comes both with clamps for around your crossbars as well as the T-Bolts that fit into the slots on the top side of roof rack crossbars.

expert reply by: Jon G

1

Answer 1

My roof rack recommendation for you will consist of a Yakima roof rack and the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs - Side Loading, part #TH898. The Hullavator will not work unless there is between 4" and 8" of…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Hey Michael, thanks for reaching out! The EcoHitch #EH57FR sits a little higher than the Curt #C52NR so it will give you better ground clearance for your 2024 Chevy Silverado 2500. The EcoHitch is a bit more recessed into the front bumper than the…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, the Thule TracRac SR Sliding Truck Bed Ladder Rack #TH57RV will fit your 2020 Ram 1500 with the 5'7" bed and no Ram box. Unfortunately, this rack is only available in the silver color. We do offer the TruXedo Elevate Truck Bed Rack…

view full answer...

Answer 9

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 10

Yes there is! The Husky 31326 hitch is made to fit the industry standard fifth wheel rails (ISR). The Curt Adapter #C88KR is also made to the same industry standard measurements. So the Curt Adapter #C88KR will be exactly what you need to use your…

view full answer...

Answer 11

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 12

Hey Bob, thanks for writing in, and you got yourself one heck of a truck with the 2024 Silverado 2500HD. And though you'll need an adapter since you have the factory prep package you can definitely use the Andersen Ultimate Connection 5th Wheel…

view full answer...

Can the Thule DockGrip Kayak and SUP Carrier be Installed Using T-Bolts

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching